70-412 ebook download (81 to 90)

High value of 70-412 braindumps materials and free samples for Microsoft certification for customers, Real Success Guaranteed with Updated 70-412 pdf dumps vce Materials. 100% PASS Configuring Advanced Windows Server 2012 Services exam Today!

2016 Jun 70-412 Study Guide Questions:

Q81. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the 

DHCP Server server role installed. 

DHCP is configured as shown in the exhibit. (Click the Exhibit button.) 

You discover that client computers cannot obtain IPv4 addresses from DC1. 

You need to ensure that the client computers can obtain IPv4 addresses from DC1. 

What should you do? 

A. Activate the scope. 

B. Authorize DC1. 

C. Disable the Allow filters. 

D. Disable the Deny filters. 

Answer: C 

Explanation: 

You have enabled the Allow list but haven't entered any MAC addresses, thus everyone is denied. Either Disable the Allow filters or start adding MAC addresses to the Allow filter. 

Note: MAC address based filtering allows specific control over which clients have access to DHCP addresses. You can create a list of computers that are allowed to obtain DHCP addresses from the server by adding the client MAC address to the list of allowed client computers. By enabling the allow list, you automatically deny access to the DHCP server addresses to any client computer not on the list. 

Reference: DHCP: If the allow list is enabled, MAC address filtering should be populated https://technet.microsoft.com/en-us/library/ee956897(v=ws.10) 

Q82. Your company recently deployed a new Active Directory forest named contoso.com. The forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server 2012 R2. 

You need to force the replication of the SYSVOL folder from Site1 to Site2. 

Which tool should you use? 

A. Active Directory Sites and Services 

B. DFS Management 

C. Repadmin 

D. Dfsrdiag 

Answer: D 

Explanation: 

In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force replication immediately by using DFS Management, as described in Edit Replication Schedules. You can also force replication by using the Dfsrdiag SyncNow command. You can force polling by using the Dfsrdiag PollAD command. 

Reference: DFS Replication: Frequently Asked Questions (FAQ) 

http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072 

Q83. HOTSPOT 

Your network contains two Web servers named Server1 and Server2. Both servers run Windows Server 2012 R2. 

Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster contains an application named App1 that is accessed by using the name appl.contoso.com. 

The NLB cluster has the port rules configured as shown in the exhibit. (Click the Exhibit button.) 

To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point. 

Answer: 

70-412  download

Refresh video training 70-412:

Q84. You have a server named Server1 that runs Windows Server 2012 R2. 

From Server Manager, you install the Active Directory Certificate Services server role on 

Server1. 

A domain administrator named Admin1 logs on to Server1. 

When Admin1 runs the Certification Authority console, Admin1 receive the following error message. 

You need to ensure that when Admin1 opens the Certification Authority console on Server1, the error message does not appear. 

What should you do? 

A. Run the Install-AdcsCertificationAuthority cmdlet. 

B. Install the Active Directory Certificate Services (AD CS) tools. 

C. Modify the PATH system variable. 

D. Add Admin1 to the Cert Publishers group. 

Answer: B 

Explanation: 

* Cannot manage Active Directory Certificate Services 

The error message is related to missing role configuration. 

* Cannot Manage Active Directory Certificate Services Resolution: configure the two Certification Authority and Certification Authority Web Enrollment Roles. 

* Active Directory Certificate Services (AD CS) is an Active Directory tool that lets administrators customize services in order to issue and manage public key certificates. 

AD CS included: 

CA Web enrollment – connects users to a CA with a Web browser 

Certification authorities (CAs) – manages certificate validation and issues certificates 

Etc. 

Incorrect: 

Not A. The CA is installed, it just need to be configured correctly. 

Note: Install-AdcsCertificationAuthority 

The Install-AdcsCertificationAuthority cmdlet performs installation and configuration of the 

AD CS CA role service. 

Reference: Cannot manage Active Directory Certificate Services in Server 2012 Error 

0x800070002; Active Directory Certificate Services (AD CS) Definition 

http://searchwindowsserver.techtarget.com/definition/Active-Directory-Certificate-Services-

AD-CS 

Q85. DRAG DROP 

Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Servers, and Server4. All servers run Windows Server 2012 R2. 

Server1 and Server2 are located in a site named Site1. Server3 and Server4 are located in a site named Site2. The servers are configured as nodes in a failover cluster named Cluster1. 

Cluster1 is configured to use the Node Majority quorum configuration. 

You need to ensure that Server1 is the only server in Site1 that can vote to maintain quorum. 

What should you run from Windows PowerShell? 

To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 

Answer: 

Q86. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Rights Management Services server role installed. 

The domain contains a domain local group named Group1. 

You create a rights policy template named Template1. You assign Group1 the rights to Template1. 

You need to ensure that all the members of Group1 can use Template1. 

What should you do? 

A. Configure the email address attribute of Group1. 

B. Convert the scope of Group1 to global. 

C. Convert the scope of Group1 to universal. 

D. Configure the email address attribute of all the users who are members of Group1. 

Answer: D 

Explanation: 

Explanation/Reference: When a user or group is created in Active Directory, the mail attribute is an optional attribute that can be set to include a primary email address for the user or group. For AD RMS to work properly, this attribute must be set because all users must have an email attribute to protect and consume content. 

Reference: AD RMS Troubleshooting Guide http://social.technet.microsoft.com/wiki/contents/articles/13130.ad-rms-troubleshooting-guide.aspx 

certleader.com

Download mcsa 70-412 pdf:

Q87. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table. 

An IP site link exits between each site. 

You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB. You need to ensure that the SiteC users are authenticated by the domain controllers in 

SiteB, unless all of the domain controllers in SiteB are unavailable. What should you do? 

A. Create an SMTP site link between SiteB and SiteC. 

B. Decrease the cost of the site link between SiteB and SiteC. 

C. Disable site link bridging. 

D. Create additional connection objects for DC1 and DC2. 

Answer: B 

Explanation: 

By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteB rather than by SiteA. 

Q88. Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domain controllers in both of the forests run Windows Server 2012 R2. The adatum.com domain contains a file server named Servers. 

Adatum.com has a one-way forest trust to contoso.com. 

A contoso.com user name User10 attempts to access a shared folder on Servers and receives the error message shown in the exhibit. (Click the Exhibit button.) 

You verify that the Authenticated Users group has Read permissions to the Data folder. 

You need to ensure that User10 can read the contents of the Data folder on Server5 in the 

adatum.com domain. 

What should you do? 

A. Grant the Other Organization group Read permissions to the Data folder. 

B. Modify the list of logon workstations of the contoso\\User10 user account. 

C. Enable the Netlogon Service (NP-In) firewall rule on Server5. 

D. Modify the permissions on the Server5 computer object in Active Directory. 

Answer: D 

Explanation: 

* To resolve the issue, I had to open up AD Users and Computers –> enable Advanced Features –> Select the Computer Object –> Properties –> Security –> Add the Group I want to allow access to the computer (in this case, DomainA\\Domain users) and allow "Allowed to Authenticate". Once I did that, everything worked: 

* For users in a trusted Windows Server 2008 or Windows Server 2003 domain or forest to be able to access resources in a trusting Windows Server 2008 or Windows Server 2003 domain or forest where the trust authentication setting has been set to selective authentication, each user must be explicitly granted the Allowed to Authenticate permission on the security descriptor of the computer objects (resource computers) that reside in the trusting domain or forest. 

Reference: Grant the Allowed to Authenticate Permission on Computers in the Trusting Domain or Forest. 

http://technet.microsoft.com/en-us/library/cc816733(v=ws.10).aspx 

Q89. Your network contains an Active Directory domain named contoso.com. The domain 

contains two member servers named Server1 and Server2. 

You install the DHCP Server server role on Server1 and Server2. You install the IP 

Address Management (IPAM) Server feature on Server1. 

You notice that you cannot discover Server1 or Server2 in IPAM. 

You need to ensure that you can use IPAM to discover the DHCP infrastructure. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. On Server2, create an IPv4 scope. 

B. On Server1, run the Add-IpamServerInventory cmdlet. 

C. On Server2, run the Add-DhcpServerInDc cmdlet 

D. On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet. 

E. On Server1, uninstall the DHCP Server server role. 

Answer: B,C 

Explanation: 

B. The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory. 

C. The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD). A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network. 

Reference: Add-IpamServerInventory; Add-DhcpServerInDC 

Q90. Your network contains two Active Directory forests named contoso.com and adatum.com. 

Contoso.com contains one domain. Adatum.com contains a child domain named child.adatum.com. 

Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust. 

Several user accounts are migrated from child.adatum.com to adatum.com. 

Users report that after the migration, they fail to access resources in contoso.com. The users successfully accessed the resources in contoso.com before the accounts were migrated. 

You need to ensure that the migrated users can access the resources in contoso.com. 

What should you do? 

A. Replace the existing forest trust with an external trust. 

B. Run netdom and specify the /quarantine attribute. 

C. Disable SID filtering on the existing forest trust. 

D. Disable selective authentication on the existing forest trust. 

Answer: C 

Explanation: 

Security Considerations for Trusts Need to gain access to the resources in contoso.com 

Disabling SID Filter Quarantining on External Trusts Although it reduces the security of your forest (and is therefore not recommended), you can disable SID filter quarantining for an external trust by using the Netdom.exe tool. You should consider disabling SID filter quarantining only in the following situations: 

* Users have been migrated to the trusted domain with their SID histories preserved, and 

you want to grant them access to resources in the trusting domain based on the SID history 

attribute. 

Etc. 

Incorrect: 

Not B. Enables administrators to manage Active Directory domains and trust relationships 

from the command prompt, /quarantine Sets or clears the domain quarantine. 

Not D. Selective authentication over a forest trust restricts access to only those users in a 

trusted forest who have been explicitly given authentication permissions to computer 

objects (resource computers) that reside in the trusting forest. 

Reference: Security Considerations for Trusts 

http://technet.microsoft.com/en-us/library/cc755321(v=ws.10).aspx 

About 70-412 Information: 70-412 Dumps

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.