A Complete Guide to 70 680 practice test

Exam Code: exam 70 680 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: TS:Windows 7,Configuring
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass mcts 70 680 Exam.

2017 NEW RECOMMEND

Free VCE & PDF File for Microsoft 70-680 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-680-dumps.html

Q181. – (Topic 5) 

You administer computers that have Windows 7 and Internet Explorer 8 installed. 

You want to log on to one of the computers and access a web-based management application that runs on a server by using Internet Explorer. 

You need to ensure that any data about your browser session is not saved on the computer. 

What should you do? 

A. From Internet Options, modify the security settings for the Internet zone. 

B. From the Local Group Policy, enable the InPrivate Filtering Threshold setting. 

C. From Internet Options, select Delete browsing history on exit. 

D. From Internet Options, on the Advanced tab, clear Enable DOM Storage. 

Answer:

Q182. – (Topic 4) 

You use a portable computer that has Windows 7 installed. The computer has a single hard disk drive and a dual-core CPU. 

You need to analyze the performance of the computer to meet the following requirements: 

. Include the CPU, Memory, and Disk subsystems. 

. Send events to another computer for predefined Event IDs. 

What should you do? 

A. Run powercfg.exe. 

B. Run the Windows Experience Index. 

C. Configure Event Viewer subscriptions. 

D. Open Task Manager. 

E. Open System Properties, and configure performance settings. 

F. Open System Properties, and configure environment variables. 

G. Open System Properties, and configure user profiles settings. 

H. Open System Properties, and configure the page file settings. 

I. Open Performance Monitor, and configure a Data Collector Set. 

J. Open Performance Monitor, and customize the System Monitor view. 

Answer:

Q183. HOTSPOT – (Topic 6) 

A company has Windows XP, Windows vista, and windows 7 computers. You receive the following emails. 

Email 1 

From: Company CIO 

Message: We are in the process of upgrading all computers. We need to ensure that everyone is running Windows 7. 

Email 2 

From: System Administrator 

Message: During the upgrades of all of the computers, we need to make sure we keep the user's Favorites folder, My Documentsfolder, and Outlook archive files. 

Email 3 

From: Accounting Department Message: Our payroll application does NOT work on Windows 7. Should we be worried? Consider each of the following statements. Does the information in the three emails support 

the inference as stated? (This question is worth three points. ) 

Answer: 

Q184. – (Topic 1) 

Which of the following tools can you use to determine if the applications installed on your computer running Windows Vista are known to have problems with Windows 7? 

A. Windows 7 Upgrade Advisor 

B. Sysprep 

C. USMT 

D. Windows PE 

Answer:

Explanation: 

Windows 7 Upgrade Advisor Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should run the Windows 7 Upgrade Advisor. The Windows 7 Upgrade Advisor is an application that you can download from Microsoft's Web site that will inform you if Windows 7 supports a computer running the current hardware and software configuration of Windows Vista. 

Prior to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you want to use with Windows 7, such as printers, scanners, and cameras, are connected to the computer. The Upgrade Advisor generates a report that informs you of which applications and devices are known to have problems with Windows 7. 

Q185. – (Topic 1) 

You have a computer that runs Windows Vista Service Pack 2 (SP2). 

You need to upgrade the computer to Windows 7. 

What should you do? 

A. Start the computer from the Windows 7 installation media and select the Upgrade option. 

B. Start the computer from the Windows 7 installation media and select the Custom (advanced) option. 

C. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Upgrade option. 

D. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Custom (advanced) option. 

Answer:

Explanation: 

Upgrading Windows Vista to Windows 7 instructionsAccess the Windows 7 installation source and double-click Setup.exe. When prompted by User Account Control, click Allow. This loads the Install Windows page. Click Install Now.Other NotesYou can upgrade computers running Windows Vista to Windows 7. When you upgrade from Windows Vista to Windows 7, all documents, settings, applications, and user accounts that existed on the computer running Windows Vista are available when the upgrade is finished. The advantage to an upgrade is that it allows you to keep the current application configuration. When you perform a migration, you need to reinstall the user's applications on the new computer. As mentioned previously, this can be problematic in organizations that are not careful about keeping track of which specific set of applications are installed on each user's computer. Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should run the Windows 7 Upgrade Advisor. The Windows 7 Upgrade Advisor is an application that you can download from Microsoft's Web site that will inform you if Windows 7 supports a computer running the current hardware and software configuration of Windows Vista. Prior to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you want to use with Windows 7, such as printers, scanners, and cameras, are connected to the computer. The Upgrade Advisor generates a report that informs you of which applications and devices are known to have problems with Windows 

7. A similar compatibility report is generated during the upgrade process, but the version created by the Windows 7 Upgrade Advisor is more likely to be up to date. 

Q186. – (Topic 3) 

You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7. 

Computer1 has a custom application installed. You create a custom XML file named app1.xml that contains the migration settings for the application. 

You need to migrate the configuration and application data for the custom application from Computer1 to Computer2. 

What should you do? 

A. On Computer1, run Loadstate.exe /l:app1. On Computer2, run Scanstate.exe /l:app1.xml. 

B. On Computer1, run Scanstate.exe /i:app1.xml. On Computer2, run Loadstate.exe /i:app1.xml. 

C. On Computer1, run Loadstate.exe /keyfile:app1.xml. On Computer2, run Loadstate.exe /keyfile:app1.xml. 

D. On Computer1, run Scanstate.exe /genconfig:app1.xml. On Computer2, run Loadstate.exe /config:app1.xml. 

Answer:

Explanation: 

User State Migration ToolUSMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState. (include) /i:[Path\\]FileName Specifies an .xml file that contains rules that define what user, application or system state to migrate. You can specify this option multiple times to include all of your .xml files (MigApp.xml, MigUser.xml and any custom .xml files that you create). Path can be either a relative or full path. If you do not specify the Path variable, then FileName must be located in the current directory. 

Q187. – (Topic 4) 

A company has a server running Windows Server2008 R2 with Windows Deployment Services(WDS), the Microsoft Deployment Toolkit(MDT), and the Windows Automated Installation Kit(WAIK) set up. The company also has client computers running windows 7 Enterpire. You are preparing to a capture an image of a windows 7 client computer. You need to ensure that the capture iamge does not contian the device drivers from the client computer. What should you do? 

A. Run the Dism command with the /Add-Driver options 

B. Run the PEImg/Prep command 

C. Run the ImageX command with the /Mount parameter 

D. Run the Start/w ocsetup command 

E. Run the DiskPart command and the Attach command option 

F. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option the answer file to False 

G. Run the Dism command with the /Mount-Wim options 

H. Use Sysprep with an answer file and set the UpdateInstalledDrivers option the answer file to Yes 

I. Run the BCDEdit /delete command 

J. Use Sysprep with an answer file and set the UpdateInstalledDrivers option the answer file to No 

K. Run the Dism command with the /Add-Package options 

L. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option the answer file to True 

M. Add a boot image and create a capture image in WDS 

Answer:

Explanation: 

Persisting Plug and Play Device Drivers During generalize You can persist device drivers when you run the sysprep command with the /generalize option by specifying the PersistAllDeviceInstallssetting in the Microsoft-Windows-PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices and installs device drivers for the detected devices. By default, these device drivers are removed from the system when you generalize the system. If you set PersistAllDeviceInstalls to true in an answer file, Sysprep will not remove the detected device drivers. For more information, see the Unattended WindowsSetup Reference (Unattend.chm). 

http://technet.microsoft.com/en-us/library/dd744512(WS.10).aspx 

Q188. – (Topic 3) 

You have a computer named Computer1 that runs Windows 7. 

Computer1 has a shared printer. 

You need to configure Computer1 so that only Administrators are authorized to shut down the computer. 

What should you do? 

A. From User Accounts, modify the user profiles settings. 

B. From User Accounts, modify the User Account Control (UAC) settings. 

C. From the local computer policy, modify the Security Options. 

D. From the local computer policy, modify the User Rights Assignment. 

Answer:

Explanation: 

Shut down the system Computer Configuration\\Windows Settings\\Security Settings\\Local Policies\\User Rights Assignment Description Determines which users logged on locally to the computer can shut down the operating system using the Shut Down command. This user right is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers. 

Q189. – (Topic 5) 

You use a portable computer that has Windows 7 installed. The computer has a single hard disk drive and a dual-core CPU. 

You need to analyze the performance of the computer to meet the following requirements: 

Include the CPU, Memory, and Disk subsystems. 

Display real-time performance. 

Obtain a list of users who have logged on by using the same tool. 

What should you do? 

A. Run powercfg.exe. 

B. Run the Windows Experience Index. 

C. Configure Event Viewer subscriptions. 

D. Open Task Manager. 

E. Open System Properties, and configure performance settings. 

F. Open System Properties, and configure environment variables. 

G. Open System Properties, and configure user profiles settings. 

H. Open System Properties, and configure the page file settings. 

I. Open Performance Monitor, and configure a Data Collector Set. 

J. Open Performance Monitor, and customize the System Monitor view. 

Answer:

Q190. – (Topic 1) 

You are installing Windows 7 on from the desktop of a Windows XP Professional PC. Which of the following can be performed from the Windows 7 DVD? Choose three. 

A. Run setup.exe from the DVD to start the Windows 7 installation. 

B. Use the autorun feature on the DVD to start the installation. 

C. Perform a full installation of Windows 7. 

D. Perform and upgrade of Windows 7 keeping all the Windows XP settings. 

Answer: A,B,C 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.