A Review Of Validated 500-006 torrent

Proper study guides for Most recent Cisco Implementing Cisco TelePresence Video Solution, Part 2 certified begins with Cisco 500-006 preparation products which designed to deliver the Printable 500-006 questions by making you pass the 500-006 test at your first time. Try the free 500-006 demo right now.

2016 Oct 500-006 Study Guide Questions:

Q41. The following Cisco TMS warning is displayed: "No route possible between X and Y." What does this warning indicate? 

A. One of the endpoints.is not registered.on the Cisco TP VCS. 

B. There is a restriction that does not allow calls between zones. 

C. TMS cannot find one of the selected systems. 

D. Gateway is not available. 

Answer: B 

Q42. What information about a change can you determine from the configuration log on a Cisco 

TelePresence VCS? 

A. The E.164 alias of the person who made the change 

B. The IP SIP address of the person who made the change 

C. The H.323 ID of the person who made the change 

D. The username of the person who made the change 

Answer: D 

Q43. Which configuration step must be completed for Cisco TelePresence Conductor to communicate with a Cisco TelePresence Server? 

A. Create a bridge pool and place the TelePresence Server in that pool. 

B. Enable SNMP on the TelePresence Server. 

C. Set the TelePresence Server to locally managed mode. 

D. Create a unique username and password on the TelePresence Server with administrator access only. 

Answer: A 


Each conference bridge must belong to a conference bridge pool. A single conference bridge can only belong to one pool. A single conference bndge pool can contain up to 30 conference bridges. Each Telepresence Conductor (or cluster of Telepresence Conductors) can use up to 30 conference bridges ac toss all of its pools For example, you could have a single pool with 30 conference bridges, or one pool with six conference bridges plus two pools with 12 conference bridges each. 

500-006  pdf exam

Replace 500-006 testing engine:

Q44. What occurs when a conference with eight sites is booked through Cisco TMS? 

A. TMS will automatically choose the most appropriate MCU that is available on the network. 

B. TMS will prompt the engineer to book an MCU on the network. 

C. TMS will cascade the call by using the built-in MultiSite capabilities of the endpoints. 

D. TMS will automatically activate Multiway. 

Answer: A 


Cisco TMS handles routing automatically. When booking conferences it is not necessary to specify network protocols or MCUs. You can modify the defaults sheeted by Cisco TMS on a per conference basis dunng book ing If a booking requires an MCU and no MCU is available, an error will be shown 

Q45. How many Cisco VCSs can be in a single cluster? 

A. 1 

B. 2 

C. 3 

D. 4 

E. 5 

F. 6 

G. 7 

H. 8 

Answer: F 



Q46. A Cisco 5310 MCU is being configured as an ad hoc conference bridge in Cisco Unified Communications Manager. Which two configuration steps must be completed for this to function correctly? (Choose two.) 

A. Install the Cisco Unified Communications Manager feature key on the MCU. 

B. Create a SIP trunk from Cisco Unified Communications Manager to the MCU. 

C. Enable Media Port Reservation on the MCU. 

D. Disable H.323 and enable SIP on the MCU. 

Answer: C,D 


Certified 500-006 pdf:

Q47. Which Cisco TelePresence VCS function is used to enable H.323 endpoints to connect to SIP endpoints? 

A. Zones 

B. Subzones 


D. Interworking 

Answer: D 


H.323 to SIP Interworking gateway: enables H.323 calls to be translated to SIP and vice versa. 

Q48. Which three methods can an engineer use to upgrade the software on the Cisco TelePresence MCU? (Choose three.) 

A. web interface 


C. flash drive 


E. serial interface 

F. RMA the unit 

G. Telnet 

Answer: A,B,C 

Q49. In which order will pre-search operations occur on a Cisco TelePresence VCS? 

A. Transforms, Call Policy, User Policy 

B. Call Policy, User Policy, Transforms 

C. User Policy, Call Policy, Transforms 

D. Transforms, User Policy, Call Policy 

Answer: A 


Any pre-search transforms are applied to the alias. Any Call Policy is applied to the (transformed) alias. If this results in one or more new target aliases, the process starts again with the new aliases checked against the pre-search transforms. Any User Policy (ifFindMeis enabled) is applied to the alias. If the alias is a FindMe ID that resolves to one or more new target aliases, the process starts again with all the resulting aliases checked against pre-search transforms and Call Policy. 

Q50. Which of these constitutes a Cisco TCS recording alias? 

A. A recording template, a media server configuration, and a call configuration 

B. A media server configuration and a call configuration 

C. A recording template and a media server configuration 

D. A recording template and a call configuration 

Answer: A 


The recordingalias determines the following: 

What to dial (for example, the H.323 ID, SIP URI)to record when using this recording alias. 

How the Content Server communicates with the endpoint or system while recording based on the specified call configuration (see Call Configurations). 

How recordings that are created with this recording alias are streamed or played back, and whether they can be played live (while recording is in progress) or only i options are specified in the template (see Templates). 

if the Content Server should send an email notification to specified users when a recording that uses the recording alias has been made. 

What recording information is copied to recordings that are created with this recording alias. 

Who has access to view or edit recordings that are created with this recording alias and whether the recordings have a password that must be entered before user them. 

If the Content Server should make a recording that uses this recording alias available for playback on an endpoint. 

About 500-006 Information: 500-006 Dumps