Advanced Guide: 70 680 practice test

Act now and download your Microsoft exam 70 680 test today! Do not waste time for the worthless Microsoft 70 680 exam tutorials. Download Most recent Microsoft TS:Windows 7,Configuring exam with real questions and answers and begin to learn Microsoft 70 680 pdf with a classic professional.


Free VCE & PDF File for Microsoft 70-680 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:

Q281. – (Topic 1) 

Which of the following must you download from Microsoft's Web site to obtain USMT 4.0? 

A. Windows Anytime Upgrade 

B. Windows Upgrade Advisor 


D. Microsoft Application Compatibility Toolkit 



User State Migration Tool USMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState. 

Q282. – (Topic 1) 

You want to create a 20-GB native VHD called Systemvhd in a folder called Windows 7 on an external U hard disk with the drive designation G:. Which command do you use? 

A. create vdisk file=g:\\windows7\\systemvhd maximum=20000 

B. create vdisk file=g:\\windows7\\systemvhd.vhd maximum=20000 

C. create vdisk file=g:\\windows7\\systemvhd.vhd maximum=20 

D. create vdisk file=g:\\windows7\\systemvhd maximum=20 


Q283. – (Topic 4) 

Your company network includes portable computers that have Windows 7 Ultimate and Windows 7 Professional installed. 

You want to standardize all portable computers to Windows 7 Professional for Key Manager Server (KMS) licensing purposes. 

You need to install Windows 7 Professional on all Windows 7 Ultimate portable computers. 

What should you do? 

A. Launch Windows Update 

B. Perform a clean installation over the existing system partitions. 

C. Perform a clean installation on non-system partitions. 

D. Supply the Windows 7 Professional KMS key. 

E. Launch Windows Anytime Upgrade. 



Think that this is right don't think it can be done 

Q284. – (Topic 5) 

You install the Windows Automated Installation Kit (WAIK) for Windows 7 on a computer that runs Windows 7. 

You want to deploy a Windows image (WIM) file to other computers in the domain. You need to capture the operating system, computer configuration, and applications installed on the computer to a WIM file. 

What should you do before you capture the image? 

A. Run Diskpart.exe. 

B. Run Oscdimg.exe. 

C. Run ScanState.exe. 

D. Run Sysprep.exe. 


Explanation: Oscdimg is a command-line tool that you can use to create an image (.iso) file of a customized 32-bit or 64-bit version of Windows Preinstallation Environment (Windows PE). You can then burn the .iso file to a CD or DVD. Oscdimg supports ISO 9660, Joliet, and Universal Disk Format (UDF) file systems. Note: … You just created your Windows PE Boot Flash Drive. Now you need to capture a generalized image for deployment. If you would like to burn WindowsPE to a CD instead of a USB thumb drive. The following command will copy all of the files necessary to create a WindowsPE boot disc into an ISO image file. Then you can burn the image file to a CD to create a bootable WindowsPE CD. In the command below the ISO image file that you will want to burn is winpex86.iso Oscdimg -n -bC:\\winpe_x86\\ C:\\winpe_x86\\ISO C:\\winpe_x86\\winpex86.iso Now burn the ISO image file winpex86.iso to a CD as a bootable image disc and you are finished! 

Q285. – (Topic 2) 

You have a computer that runs Windows 7. 

You need to identify how much disk space is occupied by previous versions. 

What should you do? 

A. At a command prompt, run Diskpart. 

B. At a command prompt, run Vaultcmd. 

C. From System, view the System Protection settings. 

D. From the properties of drive C, view the previous versions settings. 



NOT Diskpart: 

Microsoft command-line tool Diskpart is used to create and format volumes on the target computer.NOT Vaultcmd:Creates, displays and deletes stored credentials.NOT Properties of drive C:Allows you to view contents, but does not show size. 

Q286. – (Topic 1) 

Which of the following is used to control when the security pop-up notifications are used? 

A. Security Control Manager 

B. User Account Control 

C. User Access Control Panel 

D. Notification Control Settings Manager 


Q287. – (Topic 5) 

All client computers in your company network have Windows 7 Professional installed. The computers are configured with automatic scheduled Microsoft updates installation. 

You receive a support call indicating that after the recently installed update, one of the business applications is unable to start on the computers. 

You need to remove the most recent Microsoft update from the computers. 

What should you do first? 

A. From the Programs and Features, open the Installed Updates window. 

B. From the Services console, open the Windows Update service. 

C. From the Event Viewer, open the System log. 

D. From the Task Scheduler, view the WindowsBackup node. 


Q288. – (Topic 3) 

You have a computer named Computer1 that runs Windows 7. 

You plan to migrate the user state on Computer1 by using User State Migration Tool (USMT) 4.0. 

You need to identify which user documents will be included in the migration. 

What should you do? 

A. Run Usmtutils.exe and use the /ec option. 

B. Run Sysprep.exe and use the /audit option. 

C. Run Loadstate.exe and use the /v:12 option. 

D. Run Scanstate.exe and use the /genmigxml option. 



ScanState You run ScanState on the source computer during the migration. You must run ScanState.exe on computers running Windows Vista and Windows 7 from an administrative command prompt. When running ScanState on a source computer that has Windows XP installed, you need to run it as a user that is a member of the local administrators group. The following command creates an encrypted store named Mystore on the file share named Migration on the file server named Fileserver that uses the encryption key Mykey: scanstate \\\\fileserver\\migration\\mystore /i:migapp.xml /i:miguser.xml /o /config:config.xml /encrypt /key:"mykey" 

/genmigxml: path to a file This option specifies that the ScanState command should use the document finder to create and export an .xml file that defines how to migrate all of the files on the computer on which the ScanState command is running. 

Q289. – (Topic 2) 

You have a computer that runs Windows 7. 

You view the properties of a file on the computer as show in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can configure permissions on the file. 

What should you do? 

A. From Folder Options, modify the View settings. 

B. Move the file to a disk that has the NTFS file system. 

C. Open Windows Explorer by using elevated privileges. 

D. Hold the SHIFT key, right-click the file, and click Properties. 



Missing options hints not on NTFS. On NTFS volumes, you can set security permissions on files and folders. These permissions grant or deny access to the files and folders. You can view security permissions for files and folders by completing the following steps: 1. In Windows Explorer, right-click the file or folder you want to work with. 2. From the pop-up menu, select Properties, and then in the Properties dialog box click the Security tab.3. In the Name list box, select the user, contact, computer, or group whose permissions you want to view. If the permissions are dimmed, it means the permissions are inherited from a parent object. 

Q290. – (Topic 4) 

A company has a deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) on a Windows 7 client computer. 

You capture an image of the client computer. 

A new driver is released for the network card that is installed in the client computer. 

You need to update the image with the new driver for the network card. 

What should you do first? 

A. Add a boot image in WDS. 

B. Create a capture image in WDS. 

C. Run the BCDEdit command. 

D. Run the PEImg /Prepcommand. 

E. Run the Start /w ocsetup command. 

F. Run the Dism command with the/Add-Driver option, 

G. Run the Dism command with the /Mount-Wim option. 

H. Run the Dism command with the /Add-Package option. 

I. Run the ImageX command with the /Mountparameter. 

J. Run the DiskPart command and the Attach command option. 

K. Use Sysprep with an answer file and set the PersistAMDeviceInstalls option in the answer file to True. 

L. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False. 

M. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes. 

N. Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.