All About 352-001 braindumps Jul 2017

Your success in Cisco 352-001 is our sole target and we develop all our 352-001 braindumps in a way that facilitates the attainment of this target. Not only is our 352-001 study material the best you can find, it is also the most detailed and the most updated. 352-001 Practice Exams for Cisco CCDE 352-001 are written to the highest standards of technical accuracy.


Free VCE & PDF File for Cisco 352-001 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 352-001 Exam Dumps (PDF & VCE):
Available on:

Q111. Refer to the exhibit. 

You are asked to design this OSPF network to converge within 60 ms for unicast packets after a topology change due to a single link failure. Which technology can be enabled while conforming to the design requirements? 

A. Loop-Free Alternates 


C. IGP neighbor timer tuning 

D. IGP SPF timer tuning 

E. RSVP-TE Fast Reroute 


Q112. A company supports IPv4 and IPv6 addresses, and they need to be able to support flow-based translations for multiple IPv6 devices to a single IPv4 address. Which address family translation design solution should be recommended? 

A. stateful NAT-PT 


C. stateless NAT64 

D. stateful NAT64 


Q113. A Tier-3 Service Provider is evolving into a Tier-2 Service Provider due to the amount of Enterprise business it is receiving. The network engineers are re-evaluating their IP/MPLS design considerations in order to support duplicate/overlapping IP addressing from their Enterprise customers within each Layer 3 VPN. Which of the following would need to be reviewed to ensure stability in their network? 

A. Assigning unique Route Target ID's 

B. Assigning unique Route Distinguishers 

C. Assigning unique IP address space for the Enterprise NAT/Firewalls 

D. Assigning unique VRF ID's to each Layer 3 VPN 


Q114. Refer to the exhibit. 

A service provider would like to use Ethernet OAM to detect end-to-end connectivity failures between SP-SW1 and SP-SW2. In which two of these ways can you design this solution? (Choose two.) 

A. Enable Y.1731 Connectivity Fault Management on the SP switches. 

B. E-LMI PDUs must be forwarded over VPLS. 

C. Cisco Discovery Protocol PDUs must be forwarded over the VPLS. 

D. Use upward maintenance endpoints on the SP switches. 

E. Enable IEEE 802.1ag Connectivity Fault Management on the SP switches. 

Answer: DE 

Q115. Refer to the exhibit. 

A customer runs OSPF with Area 5 between its aggregation router and an internal router. When a network change occurs in the backbone, Area 5 starts having connectivity issues due to the SPF algorithm recalculating an abnormal number of times in Area 5. You are tasked to redesign this network to increase resiliency on the customer network with the caveat that Router B does not support the stub area. How can you accomplish this task? 

A. Set Area 5 to stubby at the ABR anyway. 

B. Increase the bandwidth on the connection between Router A and Router B. 

C. Turn on LSA throttling on all devices in Area 5. 

D. Implement LSA filtering on the ABR, allowing summary routes and preventing more specific routes into Area 5. 

E. Create a virtual link to Area 0 from Router B to the ABR. 


Q116. You have been tasked with designing a data center interconnect as part of business continuity. You want to use FCoE over this DCI to support synchronous replication. Which two technologies allow for FCoE via lossless Ethernet or data center bridging? (Choose two.) 



C. Multichassis EtherChannel over Pseudowire 




Answer: BF 

Q117. A company wants a design that would support OSPF through a service provider ATM network. Which two OSPF network types should the designer use to establish OSPF neighborship between OSPF routers through the ATM network? (Choose two.) 

A. A broadcast network will always work through ATM networks. 

B. A broadcast network will work when the broadcast support is explicitly configured at the ATM network. 

C. Explicit neighbor statements are required when a nonbroadcast network is configured. 

D. Explicit neighbor statements are required when a point-to-multipoint network is configured. 

E. A nonbroadcast network does not require DR selection. 

Answer: BC 

Q118. You are using iSCSI to transfer files between a 10 Gigabit Ethernet storage system and a 1 Gigabit Ethernet server. The performance is only approximately 700 Mb/s and output drops are occurring on the server switch port. Which action will improve performance in a cost-effective manner? 

A. Use a WRED random drop policy. 

B. Increase the queue to at least 1 GB. 

C. Enable the TCP Nagle algorithm on the receiver. 

D. Change the protocol to CIFS. 


Q119. Your company needs to baseline web traffic on a per-session basis for network application reporting. Which two mechanisms, when combined, fulfill the requirement? (Choose two.) 

A. Flexible Netflow 

B. Remote Monitoring 

C. Cisco IOS IP Service Level Agreement 

D. Class-Based Quality of Service Management Information Base 

E. Network-Based Application Recognition 

Answer: AE 

Q120. Which two headend router scalability factors should be considered when designing a DMVPN network solution that uses a hub-and-spoke topology? (Choose two.) 

A. the required aggregated packet per second 

B. the amount of bandwidth necessary to terminate all the remote tunnels 

C. the routing protocol chosen for the data plane routing 

D. the maximum number of tunnels supported by the headend router 

E. the CPU and memory of the headend router 

Answer: AD