exam 70 680 [Aug 2017]

We provide real mcts 70 680 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Microsoft 70 680 pdf Exam quickly & easily. The 70 680 pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Microsoft microsoft 70 680 dumps pdf and vce product and material, you can easily pass the exam 70 680 exam.

2017 NEW RECOMMEND

Free VCE & PDF File for Microsoft 70-680 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-680-dumps.html

Q211. – (Topic 2) 

You are preparing a custom Windows 7 image for deployment. 

You need to install a third-party network interface card (NIC) driver in the image. 

What should you do? 

A. Run Pkgmgr.exe and specify the /ip parameter. 

B. Run Dism.exe and specify the /add-driver parameter. 

C. Create a new answer file by using Windows System Image Manager (Windows SIM). Run Pkgmgr.exe and specify the /n parameter. 

D. Create a new answer file by using Windows System Image Manager (Windows SIM). Run Dism.exe and specify the /apply-unattend parameter. 

Answer:

Explanation: 

Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following actions: 

-Prepare a Windows PE image.- Enable or disable Windows features within an image.-Upgrade a Windows image to a different edition.- Add, remove, and enumerate packages.-Add, remove, and enumerate drivers.- Apply changes based on the offline servicing section of an unattended answer file.- Configure international settings.- Implement powerful logging features.- Service operating systems such as Windows Vista with SP1 and Windows Server 2008.- Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.- Service all platforms (32-bit, 64-bit, and Itanium).- Use existing Package Manager scripts. 

Q212. – (Topic 2) 

You have a computer that runs Windows 7. You connect to your company's network by using a VPN connection. 

You discover that when you establish the VPN connection, you are unable to access Internet Web sites. 

When you disconnect the VPN connection, you can access Internet Web sites. 

You need to access Internet Web sites while you are connected to the VPN. 

What should you do? 

A. Configure the VPN connection to use only PPTP. 

B. Configure the VPN connection to use only L2TP/IPSec. 

C. From the Internet Protocol Version 4 (TCP/IPv4) properties of the local area connection, disable the Automatic metric setting. 

D. From the Internet Protocol Version 4 (TCP/IPv4) properties of the VPN connection, disable the Use default gateway on remote network setting. 

Answer:

Explanation: 

To prevent the default route from being created In the properties of the TCP/IP protocol of the dial-up connection object, in the Advanced TCP/IP Settings dialog box, click the General tab, and then clear the Use default gateway on remote network check box. 

Q213. – (Topic 3) 

You have a computer that runs Windows 7. 

You install Internet Information Services (IIS) to test a web based application. You create a local group named Group1. You need to ensure that only the members of Group1 can access the default Web site. 

Which two configuration changes should you perform? (Each correct answer presents part of the solution, Choose two.) 

A. Modify the properties of Group1. 

B. Assign an SSL certificate to the default Web site. 

C. Modify the authentication methods of the default Web site. 

D. Modify the NTFS permissions of the %systemroot%\\inetpub\\wwwroot folder 

Answer: C,D 

Explanation: 

Modifying the Default Authentication Method 

You can use the Directory Security tab of the Web Site Properties dialog box to change the authentication method. The authentication method determines whether users are identified, and how users must be identified to access your site. The authentication method you select varies, depending on the kind of site you are creating and the purpose of the site. 

Modify the NTFS permissions of the %systemroot%\\inetpub\\wwwroot folder 

See article: 

How to set required NTFS permissions and user rights for an IIS 5.0, IIS 5.1, or IIS 6.0 

Web server http://support.microsoft.com/kb/271071 

Q214. – (Topic 1) 

You have a portable computer that runs Windows 7. You configure the computer to enter sleep mode after 10 minutes of inactivity. You do not use the computer for 15 minutes and discover that the computer has not entered sleep mode. 

You need to identify what is preventing the computer from entering sleep mode. 

What should you do? 

A. At a command prompt, run Powercfg energy. 

B. At a command prompt, run Systeminfo /s localhost. 

C. From Performance Monitor, review the System Summary. 

D. From Performance Information and Tools, review the detailed performance and system information. 

Answer:

Explanation: 

Command-line Power Configuration Powercfg.exe is a command-line utility that you can use from an administrative command prompt to manage Windows 7 power settings. It is possible to use Powercfg.exe to configure a number of Windows 7 powerrelated settings that you cannot configure through Group Policy or the Advanced Plan Settings dialog box. You can use Powercfg.exe to configure specific devices so that they are able to wake the computer from the Sleep state. You can also use Powercfg.exe to migrate power policies from one computer running Windows 7 to another by using the import and export functionality. -energy Check the computer for common energy-efficiency and battery life problems. Provides report in Hypertext Markup Language (HTML) format.For more information on Powercfg.exe, consult the following Microsoft TechNet document: http://technet.microsoft.com/en-us/library/cc748940.aspx. 

Q215. – (Topic 3) 

You have a computer that runs Windows 7 and Windows Internet Explorer 8. 

You open Internet Explorer and access a Web site. The Web site displays a page that has misaligned text and graphic image. You verify that the Web page displays correctly in previous versions of Internet Explorer. You need to view the Web page correctly. 

What should you do? 

A. Modify the text size. 

B. Enable Caret Browsing. 

C. Enable Compatibility View. 

D. Disable the SmartScreen Filter. 

Answer:

Explanation: 

Internet Explorer Compatibility View Internet Explorer Compatibility View allows sites designed for previous versions of Internet Explorer to display correctly for users of Internet Explorer 8. You can enable Compatibility View for a page by clicking the broken page icon at the end of the address bar. You can configure Compatibility View settings through the Compatibility View Settings dialog box. You can access this dialog box by clicking Compatibility View Settings on the Tools menu of Internet Explorer. 

Q216. – (Topic 3) 

You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to install Windows 7 on the computer by using the DVD installation media and receive the following error message: "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device." 

You need to ensure that you can install Windows 7 on the computer by using the DVD installation media. 

What should you do? 

A. From the BIOS, modify the startup order. 

B. From the BIOS, enable Pre-Boot Execution Environment (PXE). 

C. Create an answer file named oobe.xml and place the file on the hard disk drive. 

D. Create an answer file named autounattend.xml and place the file on the hard disk drive. 

Answer:

Explanation: To install Windows 7 from a DVD-ROM, boot from the DVD-ROM drive and follow the prompts. You may need to configure the computer's BIOS to support booting from DVD-ROM. If a computer does not have a DVD-ROM drive attached, you can still install from DVD-ROM—you just need to acquire a USB DVD-ROM drive. In this case, it will be necessary to configure the computer's BIOS to boot from the USB device. 

Q217. – (Topic 2) 

You need to increase the size of a paging file. 

What should you do? 

A. From Disk Management, shrink the boot partition. 

B. From Disk Management, shrink the system partition. 

C. From System, modify the Advanced system settings. 

D. From System, modify the System protection settings. 

Answer:

Explanation: 

1. Click Start, right-click My Computer, and then click Properties. 

2. In the System Properties dialog box, click the Advanced tab. 

3. In the Performance pane, click Settings. 

4. In the Performance Options dialog box, click the Advanced tab. 

5. In the Virtual memory pane, click Change. 

6. Change the Initial size value and the Maximum size value to a higher value, click Set, and then click OK. 

7. Click OK to close the Performance Options dialog box, and then click OK to close the System Properties dialog box. 

Adjusting Paging File SizeFor virtual-memory support, Windows 2000 creates one paging file called Pagefile.sys on the disk or volume on which the operating system is installed. The default size is equal to 1.5 times the amount of physical memory. A small paging file limits what can be stored and might exhaust your virtual memory for applications. If you are short on RAM, more paging occurs, which generates extra activity for your disks and slows response times for the system.Expand the Default SizeExpanding the default size of the paging file can increase performance if applications are consuming virtual memory and the full capacity of the existing file is being used. To determine how large your paging file should be based on your system workload, monitor the Process (_Total)\\Page File Bytes counter. This indicates, in bytes, how much of the paging file is being used. A large paging file uses disk storage space, so do not create a large paging file on a disk that is very active (for example, one that services heavy application or network activity) or one that has limited space. Change the file size gradually and test performance until you find the optimal balance between paging file and disk space usage. The operating system requires a minimum of 5 MB of free space on a disk. For more information, see "Examining and Tuning Disk Performance" in this book. Before increasing the file size, make sure you have adequate disk space, particularly on your servers. 

Q218. HOTSPOT – (Topic 6) 

You are a system administrator for a regional accounting firm. The existing computers have either Windows Vista Enterprise or Windows Vista Home Premium installed. 

Your manager wants you to upgrade all computers to Windows 7. 

You need to determine which editions of Windows 7 support an in-place upgrade from the two editions of Windows Vista. 

In the table below, identify which editions of Windows 7 will support an in-place upgrade from Windows Vista Enterprise and Home Premium. (Make only one selection in each column. This question is worth two points. ) 

Answer: 

Q219. – (Topic 2) 

Kim Akers has an administrator account on a computer running Windows 7 Enterprise. 

Don Hall has a standard account on the same computer. Both users have Microsoft Office Word and Microsoft Office Excel files saved in their Documents library. Don stores Microsoft Office PowerPoint presentations in a subfolder of his Documents library named Presentations. He also stores digital photographs in his Pictures library. 

Don has created a folder called Secret in his Documents library and has encrypted the folder and its contents. He stores confidential files in that folder. 

When Don last logged on, he deleted some personal files but did not empty his Recycle Bin. 

Kim is logged on to the computer. She has plugged in a USB flash memory device that holds personal files but has not yet copied any of these files to the computer. She has never formatted the flash memory device. 

The computer is configured to let Windows decide what files and folders to back up. 

Kim opens the Backup And Restore console but does not change any settings. She clicks Backup Now. 

Which files are backed up? (Choose all that apply.) 

A. The Word and Excel files in Don's Documents library 

B. The Word and Excel files in Kim's Documents library 

C. The PowerPoint files in Don's Presentation folder 

D. The digital photographs in Don's Pictures library 

E. The files in Don's Secret folder 

F. The files in Don's Recycle Bin 

G. The files on Kim's USB flash memory device 

Answer: A,B,C,D 

Q220. – (Topic 3) 

You plan to capture a Windows 7 image by using the Windows Preinstallation Environment (Windows PE). 

You need to ensure that Windows PE supports the Windows Scripting Host (WSH). 

Which tool should you use? 

A. Bcdedit.exe 

B. Dism.exe 

C. Imagex.exe 

D. Oscdimg.exe 

Answer:

Explanation: 

DismDeployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following actions: 

-Prepare a Windows PE image.- Enable or disable Windows features within an image.-Upgrade a Windows image to a different edition.- Add, remove, and enumerate packages.-Add, remove, and enumerate drivers.- Apply changes based on the offline servicing section of an unattended answer file.- Configure international settings.- Implement powerful logging features.- Service operating systems such as Windows Vista with SP1 and Windows Server 2008.- Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.- Service all platforms (32-bit, 64-bit, and Itanium).- Use existing Package Manager scripts. 

DISM Command-Line Options To service a Windows image offline, you must apply or mount it. WIM images can be mounted using the WIM commands within DISM, or applied and then recaptured using ImageX. You can also use the WIM commands to list the indexes or verify the architecture for the image you are mounting. After you update the image, you must dismount it and then either commit or discard the changes you have made.NOT BcdeditBCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose as Bootcfg.exe on earlier versions of Windows, but with two major improvements: BCDEdit exposes a wider range of boot options than Bootcfg.exe, and BCDEdit has improved scripting support.NOT ImagexImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack.NOT 

OscdimgOscdimg is a command-line tool for creating an image file (.iso) of a customized 32-bit or 64-bit version of Windows PE. You can then burn that .iso file to a CD-ROM or DVD-ROM. Oscdimg supports ISO 9660, Joliet, and Universal Disk Format (UDF) file systems. 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.