Foolproof exam 70-243 study material tips

Cause all that matters here is passing the Microsoft 70-243 exam. Cause all that you need is a high score of 70-243 Administering and Deploying System Center 2012 Configuration Manager exam. The only one thing you need to do is downloading {brand} 70-243 exam study guides now. We will not let you down with our money-back guarantee.

2016 Jun 70-243 Study Guide Questions:

Q11. You have Windows 7 images that are rebuilt quarterly and sported to System Center 2012 Configuration Manager. 

The Microsoft Deployment Toolkit (MDT) 2012 is integrated with Configuration Manager. 

You need to reduce the network security risks when the images are deployed by using Operating System Deployment (OSD). 

What should you do? (Choose all that Apply.) 

A. After the Apply Operating System Image task sequence step, add a step to install software updates offline. 

B. Before the Apply Operating System image task sequence step, add a step to install Deployment Imaging Servicing and Management (DISM). 

C. After the installation of the final Application, add an Install Software Updates task sequence step. 

D. After the Apply Operating System Image task sequence step, add a Run Command line step that runs wuauclt.exe /detectnow 

E. Before the Apply Operating System image task sequence step, add a step to install the Windows Automated Installation Kit (Windows AIK). 

Answer: A,C 

Explanation: 

A: To do the updates offline to reduce network security risks. 

C: Install software updates to minimize network security risks 

Note: Configuration Manager 2012: Offline Servicing for Operating System Images In Configuration Manager 2012 there is a new feature for applying updates to operating system images while they are in the Configuration Manager library. This means any operating system image you see in the Operating Systems > Operating Systems Images node from the Software Library wunderbar can be updated with Component Based Servicing (CBS) updates. By updating an image in the Software Library instead of performing a new build and capture of the operating system image you will gain a few distinct advantages. You will be able to reduce the risk of vulnerabilities during operating system deployments and reduce the overall operating system deployment to the end user. You will also reduce the administrative effort to maintain your operating system images. 

Task Sequence Steps in Configuration Manager The following task sequence steps can be added to a System Center 2012 Configuration Manager task sequence: 

Install Software Updates Use the Install Software Updates task sequence step to install software updates on the destination computer. The destination computer is not evaluated for applicable software updates until this task sequence step runs. At that time, the destination computer is evaluated for software updates like any other Configuration Manager-managed client. In particular, this step installs only the software updates that are targeted to collections of which the computer is currently a member. This task sequence step runs only in a standard operating system. It does not run in Windows PE. Further information: http://technet.microsoft.com/en-us/library/hh824821.aspx Deployment Image Servicing and Management (DISM) Technical Reference Deployment Image Servicing and Management (DISM) is a command-line tool that is used to mount and service Windows. images before deployment. You can use DISM image management commands to mount, and get information about, Windows image (.wim) files or virtual hard disks (VHD) and to capture, split, and otherwise manage .wim files. 

Reference: 

http://blogs.technet.com/b/inside_osd/archive/2011/04/18/configuration-manager-2012-offline-servicing-foroperating-system-images.aspx 

http://technet.microsoft.com/en-us/library/hh846237.aspx 

Incorrect: 

wuauclt.exe /detectnow 

The detectnow switch will force a relatively immediate query to the WSUS server to see if there are any updates that are needed. If there are, the yellow shield will appear in the system tray. This is usually pretty quick, within 20-30 seconds. 

Q12. Your network contains a System center 2012 Configuration Manager environment. 

You are creating a configuration item that contains application settings for Microsoft Office 2010. 

You need to detect whether Office 2010 is installed before validating the configuration item. 

What should you do? 

A. Create a report to display all installed software. 

B. Enable Use a custom script to detect this application. 

C. Create a direct membership collection. 

D. Create an automatic deployment rule. 

Answer: B 

Explanation: 

Provide Detection Method Information for the Configuration Item 

Use this procedure to provide detection method information for the configuration item. 

A detection method in Configuration Manager contains rules that are used to detect whether an application is installed on a computer. This detection occurs before the configuration item is assessed for compliance. To detect whether an application is installed, you can detect the presence of a Windows Installer file for the application, use a custom script, or select Always assume application is installed to assess the configuration item for compliance regardless of whether the application is installed. 

Reference: Provide Detection Method Information for the Configuration Item 

http://technet.microsoft.com/en-us/library/gg712331.aspx#BKMK_Step3 

Step 3: 

Q13. Your network contains a System Center 2012 Configuration Manager environment. 

You write the following query: Select SYS.Name from SMS_R_System SYS Join SMS_G_System_ADD_REMOVE_PROGRAMS ARP On ARP.ResourceId = SYS.ResourceId 

You need to create a list of all the client computers that have a version of Visual Studio installed. 

What should you add to the query? 

A. where ARP.DisplayName like "Visual Studio*" 

B. where ARP.DisplayName = "*Visual Studio*" 

C. where ARP.DisplayName = "%%Visual Studio" 

D. where ARP.DisplayName like "Visual studio%" 

Answer: D 

Explanation: You need to use "LIKE" not "=" otherwise the WildCard "%" is seen as a real identifier. 

70-243  testing engine

Refresh how many questions on 70-243:

Q14. Your network contains a System Center 2012 Configuration Manager environment. 

The Configuration Manager databases are located on a remote server that runs Microsoft SQL Server. 

You need to ensure that you can restore the Central Administration site. 

What should you do? 

A. From the Configuration Manager console, enable the Backup Site Server maintenance task and set a schedule. 

B. From Microsoft SQL Server Management Studio, create a maintenance plan for the site databases. 

C. From Task Scheduler, create a scheduled task that runs smssqlbkup.exe. 

D. From Windows Server Backup, schedule a full system backup. 

Answer: A 

Explanation: 

http://technet.microsoft.com/en-us/library/gg712697.aspx Backup and Recovery in Configuration Manager Enterprise solutions such as System Center 2012 Configuration Manager must prepare for both backup and recovery operations to avoid loss of critical data. For Configuration Manager sites, this preparation ensures that sites and hierarchies are recovered with the least data loss and in the quickest possible time. 

Back up a Configuration Manager Site System Center 2012 Configuration Manager provides a backup maintenance task that runs on a schedule and backs up the site database, specific registry keys, and specific folders and files. 

Backup Maintenance Task You can automate backup for Configuration Manager sites by scheduling the predefined Backup Site Server maintenance task. You can back up a central administration site and primary site, but there is no backup support for secondary sites or site system servers. 

To enable the site backup maintenance task 

1. 

In the Configuration Manager console, click Administration. 

2. 

In the Administration workspace, expand Site Configuration, and then click Sites. 

3. 

Select the site in which you want to enable the site backup maintenance task. 

4. 

On the Home tab, in the Settings group, click Site Maintenance Tasks. 

5. 

Click Backup Site Server and then click Edit. 

6. 

Select Enable this task, and then click Set Paths to specify the backup destination. 

7. 

Configure an appropriate schedule for the site backup task. As a best practice, consider a backup schedule that is outside active working hours. If you have a hierarchy, consider a schedule that runs at least two times a week to ensure maximum data retention in the event of site failure. 

8. 

Select whether to create an alert if the site backup task fails, click OK, and then click OK. When selected, Configuration Manager creates a critical alert for the backup failure that you can review in the Alerts node in the Monitoring workspace. 

Q15. DRAG DROP 

Your network contains a single Active Directory domain named contoso.com. System 

Center 2012 R2 Configuration Manager Service Pack 1 (SP1) is deployed to contoso.com. 

You have a Windows 8.1 operating system image named Image1 in Configuration 

Manager. Image1 has the data source of \\\\server1.contoso.com\\source\\Image1.wim. 

New client computers are deployed by using Image1. 

You have an application named App1. App1 is a configuration utility that must be installed 

by using a Windows Installer (MSI) package. 

You need to ensure that App1 is included in all future deployments of Image1. 

Which four actions should you perform in sequence? To answer, move the appropriate 

actions from the list of actions to the answer area and arrange them in the correct order. 

Answer: 

Q16. You have Windows 8.1 images that are rebuilt quarterly and imported to System Center 2012 R2 Configuration Manager Service Pack 1 (SP1). 

The Microsoft Deployment Toolkit (MDT) 2013 is integrated with Configuration Manager. 

You need to reduce the network security risks when the images are deployed by using Operating System Deployment (OSD). 

Which two tasks should you perform? Each correct answer presents a complete solution. 

A. Before the Apply Operating System Image task sequence step, add a step to install Deployment Imaging Servicing and Management (DISM). 

B. Before the Apply Operating System Image task sequence step, add a step to install the Windows Assessment and Deployment Kit (Windows ADK). 

C. After the Apply Operating System Image task sequence step, add a step to install software updates offline. 

D. After the installation of the final application, add an Install Software Updates task sequence step. 

E. After the Apply Operating System Image task sequence step, add a Run Command Line step that runs wuauclt.exe /detectnow. 

Answer: C,D 

Explanation: 

C: To do the updates offline to reduce network security risks. 

D: Install software updates to minimize network security risks Note: Configuration Manager 2012: Offline Servicing for Operating System Images In Configuration Manager 2012 there is a new feature for applying updates to operating system images while they are in the Configuration Manager library. This means any operating system image you see in the Operating Systems > Operating Systems Images node from the Software Library wunderbar can be updated with Component Based Servicing (CBS) updates. By updating an image in the Software Library instead of performing a new build and capture of the operating system image you will gain a few distinct advantages. You will be able to reduce the risk of vulnerabilities during operating system deployments and reduce the overall operating system deployment to the end user. You will also reduce the administrative effort to maintain your operating system images. 

Task Sequence Steps in Configuration Manager The following task sequence steps can be added to a System Center 2012 Configuration Manager task sequence: 

Install Software Updates Use the Install Software Updates task sequence step to install software updates on the destination computer. The destination computer is not evaluated for applicable software updates until this task sequence step runs. At that time, the destination computer is evaluated for software updates like any other Configuration Manager-managed client. In particular, this step installs only the software updates that are targeted to collections of which the computer is currently a member. This task sequence step runs only in a standard operating system. It does not run in Windows PE. Further information: http://technet.microsoft.com/en-us/library/hh824821.aspx Deployment Image Servicing and Management (DISM) Technical Reference Deployment Image Servicing and Management (DISM) is a command-line tool that is used to mount and service Windows. images before deployment. You can use DISM image management commands to mount, and get information about, Windows image (.wim) files or virtual hard disks (VHD) and to capture, split, and otherwise manage .wim files. 

Reference: 

http://blogs.technet.com/b/inside_osd/archive/2011/04/18/configuration-manager-2012-offline-servicing-foroperating-system-images.aspx 

http://technet.microsoft.com/en-us/library/hh846237.aspx 

Incorrect: 

wuauclt.exe /detectnow 

The detectnow switch will force a relatively immediate query to the WSUS server to see if there are any updates that are needed. If there are, the yellow shield will appear in the system tray. This is usually pretty quick, within 20-30 seconds. 

certleader.com

Verified mastering 70-243:

Q17. HOTSPOT 

Your network contains a single Active Directory named contoso.com. A System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) primary site named S01 is deployed to contoso.com. 

The Configuration Manager deployment includes the servers configured as shown in the following table. 

The distribution point is configured to require HTTPS for client communications. 

You have a domain computer named Computer1 that runs the 64-bit version of Windows 

8.1. 

You need to install the Configuration Manager client on Computer1 manually. 

Which network location should you use to start the installation? To answer, select the 

appropriate options in the answer area. 

Answer: 

Q18. You create a deployment to install Microsoft Office 2010. 

The deployment targets 5,000 client computers on the network. 

Two weeks after you create the deployment, you discover that Office 2010 fails to install on a client computer named Computer 1. 

You need to identify whether Computer1 started downloading the Application of Office 2010. 

Which log file should you review? 

A. Locationservices.log 

B. Ccm.log 

C. Sdmagent.log 

D. Sitestat.log 

E. Rcmctrl.log 

F. Dcmagent.log 

G. Contenttransfermanager.log 

H. Smsexec.log 

I. Wsyncmgr.log 

J. Ciagent.log 

K. Hman.tog 

Answer: G 

Explanation: 

Technical Reference for Log Files in Configuration Manager ContentTransferManager.log Client log file Schedules the Background Intelligent Transfer Service (BITS) or the Server Message Block (SMB) to download or to access packages. 

Reference: Technical Reference for Log Files in Configuration Manager http://technet.microsoft.com/en-us/library/hh427342.aspx 

Q19. HOTSPOT 

You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. 

You have a Configuration Manager application named App1 and a Configuration Manager package named Package1. 

You need to ensure that App1 and Package1 are deployed only to Windows 8 computers. 

In the table below, identify what to configure for App1 and Package1. NOTE: Make only one selection in each column. 

Answer: 

Q20. Your company has a production network and a test network. 

Both networks have System Center 2012 Configuration Manager deployed. 

You create the following objects on the test network: 

. A configuration item named SQLServerCI . A configuration baseline named SQLServerBaseline that contains the configuration item . A collection named SQLServers that contains all of the servers on the test network that run Microsoft SQL Server. 

You export the configuration baseline to SQLServerBaseline.cab. 

You open the Configuration Manager console, you click Assets and Compliance, and then you expand Compliance Settings. 

You need to apply the configuration baseline to the servers on the production network that run SQL Server. 

You create a collection named SQLServers that contains all SQL Servers from the production network. 

What should you do next? (Choose all that apply.) 

A. Right-click SQLServersBaseline, select Categorize, and then select Server. 

B. Right-click SQLServerCI, select Export, and then specify SQLServer Baseline.cab as the export file. 

C. Right-click SQLServersBaseline, select Deploy, and then select the SQLServers collection. 

D. Right-click Configuration Baselines, and then select Import Configuration Data 

E. Right-click SQLServersBaseline, and then select Properties. In the Deployments tab, type SQLServers in the Filter… box. 

Answer: C,D 

Explanation: 

C: To import configuration data in Configuration Manager 

1. 

In the Configuration Manager console, click Assets and Compliance. 

2. 

In the Assets and Compliance workspace, expand Configuration Items or Configuration Baselines, and then in the Home tab, in the Create group, click Import Configuration Data. Etc. 

Reference: How to Import Configuration Data in Configuration Manager 

http://technet.microsoft.com/en-us/library/hh691016.aspx 

D: To deploy a configuration baseline 

1. 

In the Configuration Manager console, click Assets and Compliance. 

2. 

In the Assets and Compliance workspace, expand Compliance Settings, and then click Configuration Baselines. 

3. 

In the Configuration Baselines list, select the configuration baseline that you want to deploy, and then in the Home tab, in the Deployment group, click Deploy. 

4. 

In the Deploy Configuration Baselines dialog box, select the configuration baselines that you want to deploy in the Available configuration baselines list. Click Add to add these to the selected configuration baselines list. 

Reference: How to Deploy Configuration Baselines in Configuration Manager 

http://technet.microsoft.com/en-us/library/hh219289.aspx 

About 70-243 Information: 70-243 Dumps

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.