Key benefits of 70 411 exam dumps pdf

It is impossible to pass Microsoft exam ref 70 411 administering windows server 2012 r2 pdf exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Microsoft 70 411 pdf practice questions. You will get a surprising result by our Far out Administering Windows Server 2012 practice guides.

2017 NEW RECOMMEND

Free VCE & PDF File for Microsoft 70-411 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-411 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-411-dumps.html

Q61. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. 

The domain contains an Edge Server named Server1. Server1 is configured as a DirectAccess server. Server1 has the following settings: 

You run the Remote Access Setup wizard as shown in the following exhibit. (Click the Exhibit button.) 

You need to ensure that client computers on the Internet can establish DirectAccess connections to Server1. 

Which additional name suffix entry should you add from the Remote Access Setup wizard? 

A. A Name Suffix value of dal.contoso.com and a blank DNS Server Address value 

B. A Name Suffix value of Server1.contoso.com and a DNS Server Address value of 65.55.37.62 

C. A Name Suffix value of dal.contoso.com and a DNS Server Address value of 

65.55.37.62 

D. A Name Suffix value of Server1.contoso.com and a blank DNS Server Address value 

Answer:

Explanation: 

Split-brain DNS is the use of the same DNS domain for both Internet and intranet resources. For example, the Contoso Corporation is using split brain DNS; contoso.com is the domain name for intranet resources and Internet resources. Internet users use http: //www.contoso.com to access Contoso’s public Web site and Contoso employees on the Contoso intranet use http: //www.contoso.com to access Contoso’s intranet Web site. A Contoso employee with their laptop that is not a DirectAccess client on the intranet that 

accesses http: //www.contoso.com sees the intranet Contoso Web site. When they take their laptop to the local coffee shop and access that same URL, they will see the public Contoso Web site. 

When a DirectAccess client is on the Internet, the Name Resolution Policy Table (NRPT) sends DNS name queries for intranet resources to intranet DNS servers. A typical NRPT for DirectAccess will have a rule for the namespace of the organization, such as contoso.com for the Contoso Corporation, with the Internet Protocol version 6 (IPv6) addresses of intranet DNS servers. With just this rule in the NRPT, when a user on a DirectAccess client on the Internet attempts to access the uniform resource locator (URL) for their Web site (such as http: //www.contoso.com), they will see the intranet version. 

Because of this rule, they will never see the public version of this URL when they are on the Internet. 

For split-brain DNS deployments, you must list the FQDNs that are duplicated on the Internet and intranet and decide which resources the DirectAccess client should reach, the intranet version or the public (Internet) version. For each name that corresponds to a resource for which you want DirectAccess clients to reach the public version, you must add the corresponding FQDN as an exemption rule to the NRPT for your DirectAccess clients. 

Name suffixes that do not have corresponding DNS servers are treated as exemptions. 

References: 

http: //technet. microsoft. com/en-us/library/ee382323(v=ws. 10). aspx 

Q62. HOTSPOT 

Your network contains a RADIUS server named Server1. 

You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy Server (NPS) installed. 

You need to ensure that all accounting requests for Server2 are forwarded to Server1. 

On Server2, you configure a Connection Request Policy. 

What else should you configure on Server2? To answer, select the appropriate node in the answer area. 

Answer: 

Q63. Your network contains an Active Directory domain named contoso.com. The domain 

contains a server named Server1 that runs Windows Server 2012 R2. 

You enable and configure Routing and Remote Access (RRAS) on Server1. 

You create a user account named User1. 

You need to ensure that User1 can establish VPN connections to Server1. 

What should you do? 

A. Modify the members of the Remote Management Users group. 

B. Add a RADIUS client. 

C. Modify the Dial-in setting of User1. 

D. Create a connection request policy. 

Answer:

Explanation: 

Access permission is also granted or denied based on the dial-in properties of each user account. 

http://technet.microsoft.com/en-us/library/cc772123.aspx 

Q64. DRAG DROP 

You have a WIM file that contains an image of Windows Server 2012 R2. 

Recently, a technician applied a Microsoft Standalone Update Package (MSU) to the image. 

You need to remove the MSU package from the image. 

Which three actions should you perform in sequence? To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order. 

Answer: 

Q65. HOTSPOT 

You have a file server named Server1 that runs Windows Server 2012 R2. 

A user named User1 is assigned the modify NTFS permission to a folder named C:\\shares and all of the subfolders of C:\\shares. 

On Server1, you open File Server Resource Manager as shown in the exhibit. (Click the Exhibit button.) 

To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point. 

Answer: 

Q66. You have a server named WSUS1 that runs Windows Server 2012 R2. WSUS1 has the Windows Server Update Services server role installed and has one volume. 

You add a new hard disk to WSUS1 and then create a volume on the hard disk. 

You need to ensure that the Windows Server Update Services (WSUS) update files are stored on the new volume. 

What should you do? 

A. From the Update Services console, configure the Update Files and Languages option. 

B. From the Update Services console, run the Windows Server Update Services Configuration Wizard. 

C. From a command prompt, run wsusutil.exe and specify the export parameter. 

D. From a command prompt, run wsusutil.exe and specify the movecontent parameter. 

Answer:

Explanation: 

Local Storage Considerations 

If you decide to store update files on your server, the recommended minimum disk size is 30 GB. However, depending on the synchronization options you specify, you might need to use a larger disk. For example, when specifying advanced synchronization options, as in the following procedure, if you select options to download multiple languages and/or the option to download express installation files, your server disk can easily reach 30 GB. 

Therefore if you choose any of these options, install a larger disk (for example, 100 GB). 

If your disk gets full, you can install a new, larger disk and then move the update files to the new location. To do this, after you create the new disk drive, you will need to run the WSUSutil.exetool (with the movecontent command) to move the update files to the new disk. For this procedure, see Managing WSUS from the Command Line. 

For example, if D:\\WSUS1 is the new path for local WSUS update storage, D:\\move. log is the path to the log file, and you wanted to copy the old files to the new location, you would type: wsusutil.exe movecontent D:\\WSUS1\\ D:\\move. Log. 

Note: If you do not want to use WSUSutil.exe to change the location of local WSUS update storage, you can also use NTFS functionality to add a partition to the current location of local WSUS update storage. For more information about NTFS, go to Help and Support Center in Windows Server 2003. 

Syntax 

At the command line %drive%\\Program Files\\Update Services\\Tools>, type: 

wsusutilmovecontentcontentpathlogfile -skipcopy [/?] 

The parameters are defined in the following table. 

contentpath – the new root for content files. The path must exist. 

logfile – the path and file name of the log file to create. 

-skipcopy – indicates that only the server configuration should be changed, and that the content files should not be copied. 

/help or /? – displays command-line help for movecontent command. 

References: 

http: //blogs.technet.com/b/sus/archive/2008/05/19/wsus-how-to-change-the-location-where-wsus-stores-updates-locally.aspx 

http: //technet.microsoft.com/en-us/library/cc720475(v=ws.10).aspx http: //technet.microsoft.com/en-us/library/cc708480%28v=ws.10%29.aspx http: //technet.microsoft.com/en-us/library/cc720466(v=ws.10).aspx http: //technet.microsoft.com/en-us/library/cc708480%28v=ws.10%29.aspx 

Q67. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed. 

You configure a quota threshold as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that a user named User1 receives an email notification when the threshold is exceeded. 

What should you do? 

A. Create a performance counter alert. 

B. Create a classification rule. 

C. Modify the members of the Performance Log Users group. 

D. Configure the File Server Resource Manager Options. 

Answer:

Explanation: 

When you create quotas and file screens, you have the option of sending e-mail notifications to users when their quota limit is approaching or after they have attempted to save files that have been blocked. If you want to routinely notify certain administrators of quota and file screening events, you can configure one or more default recipients. 

To send these notifications, you must specify the SMTP server to be used for forwarding the e-mail messages. 

To configure e-mail options 

In the console tree, right-click File Server Resource Manager, and then click Configure options. The File Server Resource Manager Options dialog box opens. 

On the E-mail Notifications tab, under SMTP server name or IP address, type the host 

name or the IP address of the SMTP server that will forward e-mail notifications. If you want to routinely notify certain administrators of quota or file screening events, under Default administrator recipients, type each e-mail address. 

Use the format account@domain. Use semicolons to separate multiple accounts. To test your settings, click Send Test E-mail. 

Q68. Your network contains an Active Directory forest named contoso.com. 

The domain contains three servers. The servers are configured as shown in the following table. 

You need to identify which server role must be deployed to the network to support the planned implementation. 

Which role should you identify? 

A. Network Policy and Access Services 

B. Volume Activation Services 

C. Windows Deployment Services 

D. Active Directory Rights Management Services 

Answer:

Explanation: 

Windows Deployment Services (WDS) is a server role that enables you to remotely deploy Windows operating systems. You can use it to set up new computers by using a network-based installation. This means that you do not have to install each operating system directly from a CD, USB drive or DVD. To use Windows Deployment Services, you should have a working knowledge of common desktop deployment technologies and networking components, including Dynamic Host Configuration Protocol (DHCP), Domain Name System (DNS), and Active Directory Domain Services (AD DS). It is also helpful to understand the Preboot execution Environment (also known as Pre-Execution Environment). 

Q69. You have a server named Server1 that runs Windows Server 2012 R2. You create a Data Collector Set (DCS) named DCS1. 

You need to configure DCS1 to log data to D:\\logs. 

What should you do? 

A. Right-click DCS1 and click Properties. 

B. Right-click DCS1 and click Export list. 

C. Right-click DCS1 and click Data Manager. 

D. Right-click DCS1 and click Save template. 

Answer:

Explanation: 

The Root Directory will contain data collected by the Data Collector Set. Change this setting if you want to store your Data Collector Set data in a different location than the default. Browse to and select the directory, or type the directory name. 

To view or modify the properties of a Data Collector Set after it has been created, you can: 

* Select the Open properties for this data collector set check box at the end of the Data 

Collector Set Creation Wizard. 

* Right-click the name of a Data Collector Set, either in the MMC scope tree or in the 

console window, and click Properties in the context menu. 

Directory tab: 

In addition to defining a root directory for storing Data Collector Set data, you can specify a 

single Subdirectory or create a Subdirectory name format by clicking the arrow to the right 

of the text entry field. 

Q70. You have a DNS server named Server1 that runs Windows Server 2012 R2. On Server1, you create a DNS zone named contoso.com. 

You need to specify the email address of the person responsible for the zone. 

Which type of DNS record should you configure? 

A. Start of authority (SOA) 

B. Host information (HINFO) 

C. Mailbox (MB) 

D. Mail exchanger (MX) 

Answer:

Explanation: 

A SOA-record defines the responsible person for an entire zone, but a zone may contain many individual hosts / domain names for which different people are responsible. The RP-record type makes it possible to identify the responsible person for individual host names contained within the zone. 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.