Want to know Actualtests 300 075 dump Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study 100% Guarantee Cisco 300 075 vce answers to Updated cisco 300 075 questions at Actualtests. Gat a success with an absolute guarantee to pass Cisco 300 075 ciptv2 (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.
2017 NEW RECOMMEND
Free VCE & PDF File for Cisco 300-075 Real Exam
Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions
Q51. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager?
A. to allow for supplementary services such as hold, transfer, and conferencing
B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server
C. when you need the ability to grow support by using DSPs
D. when you want to only use Cisco Unified Communications Manager resources
Q52. Refer to the exhibit.
The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number.
Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
How many route lists and route groups should be configured for AAR at a minimum?
A. a single route list with a local route group for each site
B. two route lists and two route groups for each site
C. a single route list and four route groups for each site
D. None. The AAR CSS can point directly to the route pattern.
Q53. In the case of a VCS cluster, which configuration element is recommended for endpoint H.323 registration?
A. DNS SRV records pointing to the VCS cluster name
B. static IP addresses
C. hostname of the VCS cluster configuration master
D. hostname of the VCS cluster member peer
Q54. Refer to the exhibit.
The Cisco Unified Communications Manager at HQ has been configured for end-to-end RSVP. The Cisco Unified Communications Manager at BR has been configured for local RSVP.
RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at the BR site to the IP phone at the HQ site, which statement is true?
A. The Cisco Unified Communications Manager at BR will fall back to local RSVP and place the call. No RSVP end-to-end will occur.
B. RSVP end-to-end will occur.
C. The Cisco Unified Communications Manager at BR will use local RSVP. The HQ Cisco Unified Communications Manager will use end-to-end RSVP.
D. The call will fail.
E. The call will proceed as a normal call with no RSVP reservation.
Q55. Refer to the exhibit:
The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified Communications Manager.
Which minimum configuration for a Cisco Unified Communications Manager Express SAF Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder?
A. router eigrp SAFiservice-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-familyvoice service safprofile trunkroute 1session protocol sip interface Loopback1 transport tcp port 5060!
B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit- service-family!voice service safprofile trunk-route 1session protocol sip interface Loopback1 transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1!
C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!
D. None of above configurations contain sufficient information.
Incorrect Answer: A, B, D only following configuration is enough router eigrp SAF service-family ipv4 autonomous-system 1 exit-service-family link:
Q56. Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco IP Telephony Authentication and Encryption Fundamentals)
A. CAPF enrollment supports the use of authentication strings.
B. The CAPF itself has to enroll with the Cisco CTL client.
C. LSCs are issued by the Cisco CTL client or by the CAPF.
D. MICs are issued by the CAPF itself or by an external CA.
Incorrect Answer: B, C, D
The CAPF enrollment process is as follows:
1. The IP phone generates its public and private key pairs.
2. The IP phone downloads the certicate of the CAPF and uses it to establish a TLS session with the CAPF.
3. The IP phone enrolls with the CAPF, sending its identity, its public key, and an optional authentication string.
4. The CAPF issues a certicate for the IP phone signed with its private key.
5. The CAPF sends the signed certicate to the IP phone.
Q57. Refer to the exhibit.
Assuming the regions configuration to BR only permits G.729 codec, how many calls are allowed for the BR location?
A. Total of four calls; two incoming and two outgoing.
B. Total of two calls in either direction.
C. Total of four calls to the BR location. Outgoing calls are not impacted by the location configuration.
D. Total of four calls in either direction.
E. Two outgoing calls. Incoming calls are unlimited.
Incorrect Answer: A, B, C, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of bandwidth Link:
Q58. Which Cisco IOS command is used to verify that a SAF Forwarder that is registered with Cisco Unified Communications Manager has established neighbor relations with an adjacent SAF Forwarder?
A. show eigrp service-family ipv4 neighbors
B. show eigrp address-family ipv4 neighbors
C. show voice saf dndball
D. show saf neighbors
E. show ip saf neighbors
Incorrect Answer: B, C, D, E
Router# show eigrp service-family ipv4 4453 neighbors
Q59. Refer to the exhibit.
How does the Cisco Unified Communications Manager advertise dn-block 2?
A. 14087071222 with number type international
B. +14087071222 with number type international
Q60. What is the difference between an MGCP gateway and a SIP gateway?
A. An MGCP gateway that dial peers be configured before PSTN calls can be placed and received. The SIP gateway requires no dial peers.
B. An MGCP gateway can be added in Cisco Unified Communications Manager under the Gateway Type field using the gateway model. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk.
C. A SIP gateway requires a call agent for PSTN calls to be placed and received. An MGCP gateway does not require a call agent for PSTN calls to be placed and received.
D. An MGCP gateway can register with Cisco Unified Communications Manager. A SIP gateway will show status of "Unknown".
E. The SIP gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway. The MGCP gateway must be configured in Cisco Unified
Communications Manager using the domain name.