[Replace] 300 075 vce

Want to know Ucertify 300 075 vce Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Accurate Cisco 300 075 ciptv2 answers to Up to the immediate present 300 075 pdf questions at Ucertify. Gat a success with an absolute guarantee to pass Cisco 300 075 dump (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.

2017 NEW RECOMMEND

Free VCE & PDF File for Cisco 300-075 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/300-075-dumps.html

Q101. Refer to the exhibit. 

Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site? 

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number. 

B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number. 

C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

Answer:

Q102. What impact do roaming-sensitive settings and Device Mobility settings have on call routing? 

A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS. 

B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS. 

C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS. 

D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS. 

Answer:

Q103. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes? 

A. show eigrp address-family ipv4 saf 

B. show voice saf routes 

C. show voice saf detail 

D. show eigrp service-family ipv4 saf 

E. show voice saf dndb all 

Answer:

Explanation: 

Incorrect Answer: A, B, C, D Router# show voice saf dnDb all Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0 

Last successful DB update @ 2009:12:14 15:42:45:967 Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModule.html#wp1201815 

Q104. When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco VCS Control, which portion of the destination URI is the first match that is attempted? 

A. the full URI, including the domain portion 

B. the destination alias, without the domain portion 

C. the E.164 number that is assigned to the Cisco TelePresence EX90 

D. the directory number that is assigned to the Cisco TelePresence EX90 

Answer:

Q105. Which two configurations provide the best SIP trunk redundancy with Cisco Unified Communications Manager? (Choose two.) 

A. Configure all SIP trunks with DNS SRV 

B. Configure all SIP trunks with Cisco Unified Border Element 

C. Configure all SIP trunks to point to a SIP gateway 

D. Configure SIP trunks to be members of route groups and route lists 

E. Configure all SIP trunks to allow TCP ports 5060 

F. Configure all SIP trunks to point to a gatekeeper through SIP to H.323 gateway 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C, E, F For SIP trunks, Cisco Unified Communications Manager supports up to 16 IP addresses for each DNS SRV and up to 10 IP addresses for each DNS host name. The order of the IP addresses depends on the DNS response and may be identical in each DNS query. The OPTIONS request may go to a different set of remote destinations each time if a DNS SRV record (configured on the SIP trunk) resolves to more than 16 IP addresses, or if a host name (configured on the SIP trunk) resolves to more than 10 IP addresses. Thus, the status of a SIP trunk may change because of a change in the way a DNS query gets resolved, not because of any change in the status of any of the remote destinations. 

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html 

Q106. When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully? 

A. dial peers that address all sites in the multisite cluster 

B. translation patterns that apply to the local PSTN for each gateway 

C. incoming and outgoing COR lists 

D. configuration of the gateway as an MGCP gateway 

Answer:

Q107. Which symbol is required for globalized call routing? 

A. + 

B. * 

C. % 

D. / 

E. ; 

Answer: A

Q108. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

SRST 

SRST-BR2 Config 

BR2 Config 

SRSTPSTNCall 

Which device configuration option will allow an administrator to control bandwidth between calls placed between branches? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Regions 

Answer:

Explanation: 

In Cisco Unified Communications Manager Administration, use the System > Location Info menu path to configure locations. Use locations to implement call admission control in a centralized call-processing system. Call admission control enables you to regulate audio quality and video availability by limiting the amount of bandwidth that is available for audio and video calls over links between the locations 

Q109. While operating in SRST, what is needed to route calls outside of the remote site location to the PSTN? 

A. SIP trunk 

B. CallManager route patterns 

C. translation patterns 

D. POTS dial peers 

E. VOIP dial peers 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E 

in time of srst configuration on router, please configure a dial-peer so that call flow in SRST mode. 

Q110. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of? 

A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway. 

B. First route group should be only the local route group. The second route group should point to the U.S. gateway. 

C. First route group should point only to the U.S. gateway. The second route group should be the local route group. 

D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically. 

E. The \\+! route pattern should point directly to the U.S. gateway. 

Answer:

Explanation: 

Incorrect Answer: A, B, D The route group points to one or more gateways and can choose the gateways for call routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group. Link: 

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08 gw.html#wp1167274 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.