Resources to exam 70 680

Cause all that matters here is passing the Microsoft 70 680 practice test exam. Cause all that you need is a high score of 70 680 practice test TS:Windows 7,Configuring exam. The only one thing you need to do is downloading Testking microsoft 70 680 exam study guides now. We will not let you down with our money-back guarantee.


Free VCE & PDF File for Microsoft 70-680 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:

Q101. – (Topic 5) 

A computer that runs Windows 7 becomes infected with malware. 

You scan the computer, remove all detected malware components, and restart the computer. 

When you attempt to connect to a financial institution's Web site, Internet Explorer redirects to another Web site and displays an alert that the Web site may be a phishing site. 

You need to prevent the computer from being redirected to the potential phishing site. 

What should you do? 

A. Configure the SmartScreen Filter. 

B. Run Ipconfig /flushdns. 

C. Configure InPrivate Browsing. 

D. Modify the hosts file. 


Q102. – (Topic 2) 

You have a computer that runs windows vista. The computer has one partition and 1 GB of RAM. 

You need to upgrade the computer to windows 7. 

What should you do? 

A. Add 1 GB of RAM. 

B. Create a second partition. 

C. Disable User Account Control (UAC). 

D. Install windows Vista Service pack 2 (SP2) 



You should keep the following in mind prior to and during the upgrade from Windows Vista to Windows 7: 

-Perform a full backup of the computer running Windows Vista prior to performing the installation. – That way, if things go wrong, you can do a full restore back to Windows Vista. You must ensure that Windows Vista has Service Pack 1 or later installed before you can upgrade it to Windows 7. – Ensure that you have the Windows 7 product key prior to the upgrade. – You cannot upgrade between processor architectures. An x86 version of Windows Vista cannot be upgraded to an x64 version of Windows 7, and vice versa. – You can upgrade only to an equivalent or higher edition of Windows 7. – You can upgrade Windows Vista Home Premium to Windows 7 Home Premium, Professional, Enterprise, or Ultimate, but not to Windows 7 Starter. Windows 7 Professional is equivalent to Windows Vista Business. – Ensure that there is at least 10 GB of free disk space on the Windows Vista volume prior to attempting the upgrade.Requirements:Windows 7 Home Premium, Professional, Ultimate, and Enterprise editions have the following minimum hardware requirements: 

-1 GHz 32-bit (x86) or 64-bit (x64) processor- 1 GB of system memory- A 40-GB hard disk drive (traditional or SSD) with at least 15 GB of available space- A graphics adapter that supports DirectX 9 graphics, has a Windows Display Driver Model (WDDM) driver, Pixel Shader 2.0 hardware, and 32 bits per pixel and a minimum of 128 MB graphics memory 

Q103. – (Topic 4) 

You administer client computers that have Windows 7 Enterprise installed. 

A server named Server1 has an IP address of The server accepts Remote Desktop connections at a custom port 10876. 

You need to connect to the server from a client computer by using Remote Desktop. 

What should you do? 

A. From the General tab of your Remote Desktop connection, type port: 10876 in the Computer field. 

B. From the Advanced tab of your Remote Desktop connection, configure the port of Server1 in the Connect from anywhere option. 

C. From the General tab of your Remote Desktop connection, type in the Computer field. 

D. From an elevated command prompt, run mstsc.exe port: 10876. 


Q104. – (Topic 1) 

Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7. 

You add a new computer named Computer1 to the subnet. 

You discover that Computer1 has an IP address of 

You cannot connect to other computers on the network. Other computers on the network can connect to each other. 

You need to ensure that you can connect to all computers on the network. What should you do? 

A. Turn off Windows Firewall. 

B. Run Ipconfig.exe /renew. 

C. Configure a static TCP/IP address. 

D. Run Netsh.exe interface ipv4 install. 



[Need better justification] Configuring static IP addresses When you assign a static IP address, you need to tell the computer the IP address you want to use, the subnet mask for this IP address, and, if necessary, the default gateway to use for internetwork communications. An IP address is a numeric identifier for a computer. Ip addressing schemes vary according to how your network is configured, but they're normally assigned based on a particular network segment. 

Q105. – (Topic 1) 

You have a computer that runs Windows Vista. The computer contains a custom application. 

You need to export the user state and the settings of the custom application. 

What should you do? 

A. Run Loadstate.exe and specify the /config parameter. 

B. Run Scanstate.exe and specify the /genconfig parameter. 

C. Modify the miguser.xml file. Run Loadstate.exe and specify the /ui parameter. 

D. Modify the migapp.xml file. Run Scanstate.exe and specify the /i parameter. 



MigApp.xml This file contains rules about migrating application settings. These include Accessibility settings, dial-up connections, favorites, folder options, fonts, group membership, Open Database Connectivity (ODBC) settings, Microsoft Office Outlook Express mailbox files, mouse and keyboard settings, phone and modem options, Remote Access Service (RAS) connection phone book files, regional options, remote access, screensaver settings, taskbar settings, and wallpaper settings.(Include) /i:[Path\\]FileName Specifies an .xml file that contains rules that define what user, application or system state to migrate. You can specify this option multiple times to include all of your .xml files (MigApp.xml, MigUser.xml and any custom .xml files that you create). Path can be either a relative or full path. If you do not specify the Path variable, then FileName must be located in the current directory.NOT MigUser.xmlMigUser.xml This file contains rules about user profiles and user data. The default settings for this file migrate all data in My Documents, My Video, My Music, My Pictures, desktop files, Start Menu, Quick Launch settings, favorites, Shared Documents, Shared Video, Shared Music, Shared desktop files, Shared Pictures, Shared Start menu, and Shared Favorites. This file also contains rules that ensure that all the following file types are migrated from fixed volumes: .qdf, .qsd, .qel, .qph, .doc, .dot, .rtf, .mcw, .wps, .scd, .wri, .wpd, .xl*, .csv, .iqy, . dqy, .oqy, .rqy, .wk*, .wq1, .slk, .dif, .ppt*, .pps*, .pot*, .sh3, .ch3, .pre, .ppa, .txt, .pst, .one*, .mpp, .vsd, .vl*, .or6, .accdb, .mdb, .pub, .xla, .xlb and .xls. The asterisk ( *) represents zero or more characters. 

Q106. – (Topic 1) 

You have a computer named Computer1 that runs Windows Vista and a computer named Computer2 that runs Windows 7. You plan to migrate all profiles and user files from Computer1 to Computer2. 

You need to identify how much space is required to complete the migration. 

What should you do? 

A. On Computer1 run Loadstate c:\\store /nocompress 

B. On Computer1 run Scanstate c:\\store /nocompress /p 

C. On Computer2 run Loadstate \\\\computer1\\store /nocompress 

D. On Computer2 run Scanstate \\\\computer1\\store /nocompress /p 



ScanState You run ScanState on the source computer during the migration. You must run ScanState.exe on computers running Windows Vista and Windows 7 from an administrative command prompt. When running ScanState on a source computer that has Windows XP installed, you need to run it as a user that is a member of the local administrators group. The following command creates an encrypted store named Mystore on the file share named Migration on the file server named Fileserver that uses the encryption key Mykey: scanstate \\\\fileserver\\migration\\mystore /i:migapp.xml /i:miguser.xml /o /config:config.xml /encrypt /key:"mykey" Space Estimations for the Migration StoreWhen the ScanState command runs, it will create an .xml file in the path specified. This .xml file includes improved space estimations for the migration store. The following example shows how to create this .xml file: Scanstate.exe C:\\MigrationLocation [additional parameters] /p:"C:\\MigrationStoreSize.xml" To preserve the functionality of existing applications or scripts that require the previous behavior of USMT, you can use the /p option, without specifying "pathtoafile", in USMT 4.0. If you specify only the /p option, the storage space estimations are created in the same manner as with USMT 3.x releases. User State Migration ToolUSMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState. 

Q107. – (Topic 1) 

You have a computer that runs Windows 7. 

You update the driver for the computer's video card and the computer becomes unresponsive. 

You need recover the computer in the minimum amount of time. 

What should you do? 

A. Restart in safe mode and then roll back the video card driver. 

B. Restart in safe mode and then revert the computer to a previous restore point. 

C. Start the computer from the Windows 7 installation media. Select Repair your computer and then select System Restore. 

D. Start the computer from the Windows 7 installation media. Select Repair your computer and then select System Image Recovery. 



If you install a driver that causes your computer to become unstable, you should first attempt to roll back the driver. If this does not solve the problem, you can restore system files and settings by performing a system restore to restore the computer to its last system restore point. A system restore returns a computer system to a selected restore point. System restores do not alter user files. Note that a system restore is not the same as a System Image restore. 

Q108. – (Topic 2) 

To establish a DirectAccess connection to the network, what is the first requirement? 

A. Install a certificate 

B. Create a VPN connection 

C. A static IPv4 address 

D. A static IPv6 address 


Q109. – (Topic 4) 

A company has client computers that run Windows 7 Enterprise. 

You need to ensure that only signed and validated executable files are run with elevated privileges. 

What should you use to achieve this goal? 

A. the folder properties window 

B. the icacls command 

C. Device Manager 

D. share permissions 

E. the Group Policy management console 

F. Local Users and Groups 

G. the netsh command 

H. the Services management console 

I. the User Account Control Settings Controal Panel window 


Explanation: Accessed through secpol.msc too 

Q110. – (Topic 3) 

A user named User1 uses a shared computer that runs Windows 7. 

User1 is a standard user. User1 attempts to connect a USB device to the computer and is prompted to enter administrative credentials. 

You need to ensure that User1 can use the USB device without requiring administrative credentials. 

What should you do first? 

A. Add User1 to the Power Users group. 

B. Run Pnputil.exe and specify the – i- a parameters. 

C. Run Driverquery.exe and specify the /SI parameter. 

D. Copy the driver files to the C:\\windows\\system32 folder. 



When a driver is staged, it is placed in the device driver store and non-administrators can install the device, provided they have permission to install devices in the appropriate device setup class. Pnputil.exe is a command line utility that you can use to manage the driver store. You can use Pnputil to add driver packages, remove driver packages, and list driver packages that are in the store. -i Specifies to install the identified INF file. Cannot be used in conjunction with the -f parameter. 

Example pnputil.exe -i -a a:\\usbcam\\USBCAM.INF Adds and installs the specified driver