Secrets to 70 410 installing and configuring windows server 2012 pdf

Want to know Examcollection 70-410 Exam practice test features? Want to lear more about Microsoft Installing and Configuring Windows Server 2012 certification experience? Study Free Microsoft 70-410 answers to Updated 70-410 questions at Examcollection. Gat a success with an absolute guarantee to pass Microsoft 70-410 (Installing and Configuring Windows Server 2012) test on your first attempt.

♥♥ 2017 NEW RECOMMEND ♥♥

Free VCE & PDF File for Microsoft 70-410 Real Exam
(Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-410-dumps.html

Q211. – (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com. 

The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server. 

From Server2, you run nslookup.exe as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that when you run Nslookup, the correct name of the default server is displayed. 

What should you do? 

A. On Server1, create a reverse lookup zone. 

B. On Server1, modify the Security settings of the contoso.com zone. 

C. From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list. 

D. From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list. 

Answer:

Explanation: 

Make sure that a reverse lookup zone that is authoritative for the PTR resource record 

exists. 

PTR records contain the information that is required for the server to perform reverse name 

lookups. 

References: 

http://technet.microsoft.com/en-us/library/cc961417.aspx 

Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: 

Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6 

addressing, p.246 

Q212. – (Topic 1) 

Your network contains an Active Directory domain named adatum.com. 

You discover that when users join computers to the domain, the computer accounts are created in the Computers container. 

You need to ensure that when users join computers to the domain, the computer accounts are automatically created in an organizational unit (OU) named All_Computers. 

What should you do? 

A. From a command prompt, run the redircmp.exe command. 

B. From ADSI Edit, configure the properties of the OU1 object. 

C. From Ldp, configure the properties of the Computers container. 

D. From Windows PowerShell, run the Move-ADObject cmdlet. 

Answer:

Explanation: 

This command redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in All_Computers. 

: http://technet.microsoft.com/en-us/library/cc770619.aspx 

Q213. – (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1that runs Windows Server 2012 R2. 

You create a DHCP scope named Scope1. The scope has a start address of 192168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192. 

You need to ensure that Scope1 has a subnet mask of 255.255.255.0. What should you do first? 

A. From Windows PowerShell, run the Remove-DhcpServerv4PolicyIPRange cmdlet. 

B. From the DHCP console, modify the Scope Options of Scope1. 

C. From Windows PowerShell, run the Remove-DhcpServerv4Scope cmdlet. 

D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet. 

Answer:

Explanation: 

. Set-DhcpServerv4Scope Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service. 

. Syntax: Parameter Set: WithoutRange Set-DhcpServerv4Scope [-ScopeId] <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] Parameter Set: WithRange Set-DhcpServerv4Scope [-ScopeId] <IPAddress> -EndRange <IPAddress> -StartRange <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] 

Q214. – (Topic 3) 

Your network contains multiple subnets. 

On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2. 

You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com. 

You need to ensure that client computers can resolve IP addresses to host names. 

What should you do first? 

A. Create a GlobalNames zone. 

B. Convert the contoso.com zone to an Active Directory-integrated zone. 

C. Configure dynamic updates for contoso.com. 

D. Create a reverse lookup zone. 

Answer:

Explanation: 

Use a reverse lookup zone to be able to resolve IP addresses to host names. 

Q215. – (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed. 

You have been instructed to modify an Active Directory computer object. 

Which of the following actions should you take? 

A. You should consider making use of the Get-ADComputer Windows PowerShell cmdlet. 

B. You should consider making use of the Set-ADComputer Windows PowerShell cmdlet 

C. You should consider making use of the New-ADComputer Windows PowerShell cmdlet 

D. You should consider making use of the Get-ADComputerServiceAccount Windows PowerShell cmdlet 

Answer:

Explanation: 

Set-ADComputer – Modifies an Active Directory computer object. 

Q216. – (Topic 3) 

You have a server named Server2 that runs Windows Server 2012 R2. You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.) The Everyone group has read share permission and read NTFS permission to Sources. 

You need to ensure that when users browse the network, the Sources share is not visible. 

What should you do? 

A. From the properties of the Sources folder, remove the Sources share, and then share the Sources folder as Sources$ B. From the properties of the Sources folder, deny the List Folder Contents permission for the Everyone group 

C. From the properties of the Sources share, configure access-based enumeration 

D. From the properties of the Sources folder, configure the hidden attribute 

Answer:

Q217. – (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You connect three new hard disks to Server1. 

You need to create a storage space that contains the three disks. 

The solution must meet the following requirements: 

. Provide fault tolerance if a single disk fails. 

. Maximize the amount of files that can be stored in the storage space. 

What should you create? 

A. A simple space 

B. A spanned volume 

C. A mirrored space 

D. A parity space 

Answer:

Explanation: 

A. Stripes data across a set of pool disks, and is not resilient to any disk failures. 

B. A spanned volume is a dynamic volume consisting of disk space on more than one physical disk and not fault tolerant 

C. Fault tolerant but Not max space 

D. Fault tolerant and better space ratio Parity spaces are designed for capacity efficiency and increased resiliency. Parity spaces are best suited for archival data and streaming media, such as music and videos. 

Q218. – (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual. 

You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV). 

You need to enable SR-IOV for all of the virtual machines on Server1. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. On each virtual machine, modify the Advanced Features settings of the network adapter. 

B. Modify the settings of the RDS Virtual virtual switch. 

C. On each virtual machine, modify the BIOS settings. 

D. Delete, and then recreate the RDS Virtual virtual switch. 

E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter. 

Answer: D,E 

Explanation: 

The first step when allowing a virtual machine to have connectivity to a physical network is to create an external virtual switch using Virtual Switch Manager in Hyper-V Manager. The additional step that is necessary when using SR-IOV is to ensure the checkbox is checked when the virtual switch is being created. It is not possible to change a “non SR-IOV mode” external virtual switch into an “SR-IOV mode” switch. The choice must be made a switch creation time. Thus you should first delete the existing virtual switch and then recreate it. 

E: Once a virtual switch has been created, the next step is to configure a virtual machine. 

SR-IOV in Windows Server “8” is supported on x64 editions of Windows “8” as a guest operating system (as in Windows “8” Server, and Windows “8” client x64, but not x86 client).We have rearranged the settings for a virtual machine to introduce sub-nodes under a network adapter, one of which is the hardware acceleration node. At the bottom is a checkbox to enable SR-IOV. 

Q219. – (Topic 1) 

You have virtual machine named VM1. 

VM1 uses a fixed size virtual hard disk (VHD) named Disk1.vhD. Disk1.vhd is 200 GB. 

You shut down VM1. 

You need to reduce the size of disk1.vhd. 

Which action should you select from the Edit Virtual Hard Disk Wizard? 

A. Merge 

B. Compact 

C. Shrink 

D. Convert 

Answer:

Q220. – (Topic 3) 

You have a server named Server1. Server1 runs a Server Core installation of Windows 

Server 2012 R2. The local area connection on Server1 has the following configuration: 

IP address: 10.1.1.1 

Subnet mask: 255.255.240.0 

Default gateway: 10.1.1.254 

Preferred DNS server: <none> 

The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1. 

Which command should you run? 

A. sconfig.cmd 

B. net.exe 

C. Set-NetIPInterface 

D. netsh.exe 

Answer:

Explanation: 

In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. Network settings You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well. 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.