Super to exam 70 412

Act now and download your Microsoft examcollection 70 412 test today! Do not waste time for the worthless Microsoft examcollection 70 412 tutorials. Download Updated Microsoft Configuring Advanced Windows Server 2012 Services exam with real questions and answers and begin to learn Microsoft examcollection 70 412 with a classic professional.

2017 NEW RECOMMEND

Free VCE & PDF File for Microsoft 70-412 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-412 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-412-dumps.html

Q121. HOTSPOT 

You have a server that runs Windows Server 2012 R2 and has the iSCSI Target Server role service installed. 

You run the New-IscsiVirtualDisk cmdlet as shown in the New-IscsiVirtualDisk exhibit. (Click the Exhibit button.) 

To answer, complete each statement according to the information presented in the exhibits. Each correct selection is worth one point. 

Answer: 

Q122. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table. 

An IP site link exits between each site. 

You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB. 

You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable. 

What should you do? 

A. Create an SMTP site link between SiteB and SiteC. 

B. Create additional connection objects for DC3 and DC4. 

C. Decrease the cost of the site link between SiteB and SiteC. 

D. Create additional connection objects for DC1 and DC2. 

Answer:

Explanation: 

By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteB rather than by SiteA. 

Q123. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012. 

Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. 

Server1 and Server2 are members of a cluster named Cluster1. Cluster1 hosts 10 virtual machines. 

When you try to migrate a running virtual machine from one server to another, you receive the following error message: "There was an error checking for virtual machine compatibility on the target node." 

You need to ensure that the virtual machines can be migrated from one node to another. 

From which node should you perform the configuration? 

To answer, select the appropriate node in the answer area. 

Answer: 

Q124. DRAG DROP 

Your network contains an Active Directory domain named adatum.com. The domain contains three servers. The servers are configured as shown in the following table. 

Server1 is configured as shown in the exhibit. (Click the Exhibit button.) 

Template1 contains custom cryptography settings that are required by the corporate security team. 

On Server2, an administrator successfully installs a certificate based on Template1. 

The administrator reports that Template1 is not listed in the Certificate Enrollment wizard on Server3, even after selecting the Show all templates check box. 

You need to ensure that you can install a server authentication certificate on Server3. The certificate must comply with the cryptography requirements. 

Which three actions should you perform in sequence? 

To answer, move the appropriate three actions from the list of actions to the answer area 

and arrange them in the correct order. 

Answer: 

Q125. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. The system properties of Server1 are shown in the exhibit. (Click the Exhibit button.) 

You need to configure Server1 as an enterprise subordinate certification authority (CA). 

What should you do first? 

A. Add RAM to the server. 

B. Set the Startup Type of the Certificate Propagation service to Automatic. 

C. Install the Certification Authority Web Enrollment role service. 

D. Join Server1 to the contoso.com domain. 

Answer:

Explanation: 

Enterprise CAs must be domain members. From the exhibit we see that it is only a 

Workgroup member. 

Note: 

A new CA can be the root CA of a new PKI or subordinate to another in an existing PKI. 

Enterprise subordinate certification authority. 

An enterprise subordinate CA must get a CA certificate from an enterprise root CA but can 

then issue certificates to all users and computers in the enterprise. These types of CAs are 

often used for load balancing of an enterprise root CA. 

Reference: Install a Subordinate Certification Authority 

Q126. You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. 

Server1 has a volume named D that contains user data. Server1 has a volume named E that is empty. 

Server1 is configured to create a shadow copy of volume D every hour. You need to configure the shadow copies of volume D to be stored on volume E. 

What should you run? 

A. The Set-Volume cmdlet with the -driveletter parameter 

B. The Set-Volume cmdlet with the -path parameter 

C. The vssadmin.exe add shadowstorage command 

D. The vssadmin.exe create shadow command 

Answer:

Explanation: 

Add ShadowStorage 

Adds a shadow copy storage association for a specified volume. 

Incorrect: 

Not A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a 

letter used to identify a drive or volume in the system. 

Not B. Create Shadow 

Creates a new shadow copy of a specified volume. 

Not C. Sets or changes the file system label of an existing volume -Path Contains valid 

path information. 

Reference: Vssadmin; Set-Volume 

http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx 

http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx 

Q127. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The relevant servers in the domain are configured as shown in the following table. 

You plan to create a shared folder on Server1 named Share1. Share1 must only be accessed by users who are using computers that are joined to the domain. 

You need to identify which servers must be upgraded to support the requirements of Share1. 

In the table below, identify which computers require an upgrade and which computers do not require an upgrade. Make only one selection in each row. Each correct selection is worth one point. 

Answer: 

Q128. Your network contains two Active Directory forests named contoso.com and adatum.com. Each forest contains one domain. Contoso.com has a two-way forest trust to adatum.com. Selective authentication is enabled on the forest trust. 

Contoso contains 10 servers that have the File Server role service installed. Users successfully access shared folders on the file servers by using permissions granted to the Authenticated Users group. 

You migrate the file servers to adatum.com. 

Contoso users report that after the migration, they are unable to access shared folders on the file servers. 

You need to ensure that the Contoso users can access the shared folders on the file servers. 

What should you do? 

A. Disable selective authentication on the existing forest trust. 

B. Disable SID filtering on the existing forest trust. 

C. Run netdom and specify the /quarantine attribute. 

D. Replace the existing forest trust with an external trust. 

Answer:

Explanation: 

Although it is not recommended, you can use this procedure to disable security identifier (SID) filter quarantining for an external trust with the Netdom.exe tool. You should consider disabling SID filter quarantining only in the following situations: 

* Users have been migrated to the trusted domain with their SID histories preserved, and you want to grant those users access to resources in the trusting domain (the former domain of the migrated users) based on the sIDHistory attribute. 

Etc. 

Reference: Disabling SID filter quarantining 

http://technet.microsoft.com/en-us/library/cc794713(v=ws.10).aspx 

Q129. Your network contains 20 iSCSI storage appliances that will provide storage for 50 Hyper-V hosts running Windows Server 2012 R2. 

You need to configure the storage for the Hyper-V hosts. The solution must minimize administrative effort. 

What should you do first? 

A. Install the iSCSI Target Server role service and configure iSCSI targets. 

B. Install the iSNS Server service feature and create a Discovery Domain. 

C. Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties. 

D. Install the Multipath I/O (MPIO) feature and configure the MPIO Properties. 

Answer:

Explanation: 

Windows Server 2012 includes an iSCSI Target role that, along with Failover Clustering, 

allows it to become a cost-effective and highly-available iSCSI Storage Array. We can connect from our Hyper-V host to the iSCSI target on the storage array with the following PowerShell command line: 

New-IscsiTargetPortal –TargetPortalAddress <IP_Address or FQDN of storage array> 

$target = Get-IscsiTarget 

Connect-IscsiTarget –NodeAddress $target.NodeAddress 

Incorrect: 

Not B. Discovery Domains in an iSCSI fabric, like zones in a Fibre Channel fabric, enable you to partition the storage resources in your storage area network (SAN). By creating and managing Discovery Domains, you can control the iSCSI targets that each iSCSI initiator can see and log on to. 

Reference: Configure iSCSI Target Server Role on Windows Server 2012 

Q130. Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and childl.contoso.com. The domains contain three domain controllers. The domain controllers are configured as shown in the following table. 

You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring setting is enforced in both domains. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Raise the domain functional level of contoso.com. 

B. Raise the domain functional level ofchildl.contoso.com. 

C. Raise the forest functional level of contoso.com. 

D. Upgrade DC11 to Windows Server 2012 R2. 

E. Upgrade DC1 to Windows Server 2012 R2. 

Answer: A,E 

Explanation: 

The root domain in the forest must be at Windows Server 2012 level. First upgrade DC1 to this level (E), then raise the contoso.com domain functional level to Windows Server 2012 (A). 

* (E) To support resources that use claims-based access control, the principal’s domains 

will need to be running one of the following: 

/ All Windows Server 2012 domain controllers. 

/ Sufficient Windows Server 2012 domain controllers to handle all the Windows 8 device 

authentication requests. 

/ Sufficient Windows Server 2012 domain controllers to handle all the Windows Server 

2012 resource protocol transition requests to support non-Windows 8 devices. 

Reference: What's New in Kerberos Authentication 

http://technet.microsoft.com/en-us/library/hh831747.aspx. 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.