Super ways to microsoft 70 680

Proper study guides for Abreast of the times Microsoft TS:Windows 7,Configuring certified begins with Microsoft exam 70 680 preparation products which designed to deliver the Downloadable mcts 70 680 questions by making you pass the mcts 70 680 test at your first time. Try the free 70 680 practice test demo right now.

2017 NEW RECOMMEND

Free VCE & PDF File for Microsoft 70-680 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-680-dumps.html

Q131. – (Topic 6) 

You maintain Windows 7 virtual hard disks (VHDs) at Contoso, Ltd. 

You are applying a series of updates to one of the company's VHDs by using the Windows Deployment Image Servicing and Management (DISM) system. The VHD contains a Windows 7 64-bit operating system. The image is stored in N:\\Images\\Win7img. vhd.Additionally, there are three updates required, which are stored in subfolders of N:\\updates. 

You need to mount and apply Windows updates to the offline VHD. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two. ) 

A. Use diskpart to mount the VHD. 

B. Use Dism with /Add-Driver and /recurse options. 

C. Use Dism to mount the VHD. 

D. Use Dism with /Add-Package /recurse. 

Answer: A,D 

Explanation: A: To Attach a. VHD Diskpart Select vdisk file=c:\\wims\\W7Ultimate.vhd attach vdisk assign letter=F exit 

D: Example: 

Dism /image:C:\\WIM\\offline /Add-Package /PackagePath:C:\\Updates\\ 

Incorrect: 

not B: we are not adding drivers. 

Q132. – (Topic 6) 

You have a computer that runs Windows 7. 

The computer's hard disks are configured as shown in the following table. 

You need to ensure that you can recover the operating system and all the files on the computer if hard disk 0 experiences hardware failure. 

What should you do? 

A. Use the Backup and Restore tool to create a system image on an external hard disk. 

B. Create a restore point for both hard disks. 

C. Use the Backup and Restore tool to back up data files for all users. 

D. Shrink drive C and then create a new partition. 

Answer:

Explanation: System Image in Windows 7 The new backup utilities in Windows 7 are actually pretty impressive and creating an image will be possible in all versions. Today we take a look at creating a backup image of your machine without the need for a third party utility like Ghost or True Image. 

You are just finished installing a fresh copy of Windows 7 on your computer and have it set up to your liking. One of the first things you should do now is create an image of the disc so in the event of a crash you will be able to restore it to its current state. An image is an exact copy of everything on the drive and will restore it back to its current state. It's probably best to create an image when everything is clean and organized on your system. This will make the image file smaller and allows you to restore the system with a smooth running set up. 

Q133. HOTSPOT – (Topic 6) 

A manufacturing company has Windows Vista and Windows XP computers. 

You are responsible for upgrading all computers to Windows 7. 

You test the Windows 7 installation on a Windows Vista computer. Early in the installation process, you are prompted to choose the "Upgrade" option or the "Custom (Advanced)" installation option. 

You need to determine which installation option is appropriate for the different computers in your company. 

In the table below, identify the characteristics of the Upgrade and Custom installation options. (Make only one selection in each column. This question is worth two points. ) 

Answer: 

Q134. – (Topic 3) 

You have a computer that runs Windows XP Service Pack 3 (SP3). The computer is a member of an Active Directory domain. Several domain users log on to the computer. 

You plan to install Windows 7 on the computer. 

You need to ensure that all user settings are preserved after the installation. 

What should you do? 

A. Run Loadstate.exe, install Windows 7, and then run Scanstate.exe. 

B. Run Sysprep.exe /audit, install Windows 7, and then run Sysprep.exe /oobe. 

C. Run Windows Easy Transfer, install Windows 7, and then run Windows Easy Transfer again. 

D. Create a backup of %systemdrive%\\documents and settings, install Windows 7, and then restore the backup. 

Answer:

Explanation: 

Windows Easy Transfer Windows Easy Transfer is a utility that comes with Windows 7 that you can use to transfer user profile data from computers running Windows XP, Windows Vista, or Windows 7 to new computers running Windows 7. Windows Easy Transfer can be used to transfer user accounts, documents, music, pictures, e-mail, bookmarks, certificates, and other data. External Hard Disk or USB Flash Drive You can specify an attached external hard disk or USB flash drive. It is also possible to specify an internal hard disk drive or network share when using this method. You can perform a side-by-side migration as well as a wipe-and-restore migration using this method. You protect your data by entering a password on the source computer that you must again enter before importing the data on the destination computer. 

Q135. – (Topic 6) 

You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive. 

You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium. 

You need to configure the computer to support the dual boot. 

What should you do? 

A. Start Windows 7 Home Premium. Add a new entry to the boot menu. 

B. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate. 

C. Reinstall Windows 7 Home Premium 32 bit as a 64-bit version. 

D. Start Windows 7 Home Premium. Create and mount a new Windows Imaging Format (WIM) file with Windows 7 Ultimate files. 

Answer:

Q136. – (Topic 5) 

You administer client computers that have Windows 7 Enterprise installed. 

A server named Server1 has an IP address of 10.10.4.56. The server accepts Remote Desktop connections at a custom port 10876. 

You need to connect to the server from a client computer by using Remote Desktop. 

What should you do? 

A. From an elevated command prompt, run mstsc.exe 10.10.4.56 port: 10876. 

B. From the Advanced tab of your Remote Desktop connection, configure the port of Server1 in the Connect from anywhere option. 

C. From the General tab of your Remote Desktop connection, type 10.10.4.56:10876 in the Computer field. 

D. From the Advanced tab of your Remote Desktop connection, configure the IP address and port of Server1 as the RD Gateway Server. 

Answer:

Explanation: 

Note: 

* mstsc.exe allows you to initiate terminal services commands via the command line, and forms an important part of this additional Windows service. 

Incorrect: 

Not A: Incorrect syntax. 

Q137. HOTSPOT – (Topic 4) 

A company has client computers that run Windows 7. You create an AppLocker policy for the client computers. 

You need to ensure that the AppLocker policy is enforced after the computers restart. 

Which service startup type should you use? (To answer, select the appropriate setting or settings in the work area.) 

Answer: 

Q138. DRAG DROP – (Topic 4) 

You use a computer that has Windows 7 Enterprise installed. The computer has a single 

500GB hard disk. 

You install two new 1 terabyte hard disks. 

You need to configure the new disks in a fault-tolerant configuration. 

What should you do? (To answer, move the appropriate actions from the list of actions from the list the answer area and arrange them in the correct order). 

Answer: 

Q139. – (Topic 2) 

You have a computer that runs Windows 7. You attempt to add files to %programfiles%\\app1 and receive a prompt to elevate your privileges. You need to ensure that you can add files to %programfiles%\\app1 without receiving a prompt for elevated privileges. The solution must prevent harmful applications from making unwanted changed to the system. What should you do? 

A. Enable the built-in administrator account. 

B. Modify the User Account Control (UAC) settings. 

C. Add your user account to the local Power Users group. 

D. Modify the permissions of the %programfiles%\\app1 folder. 

Answer:

Explanation: In order to secure a computer and its resources, you must consider the rights that users will have. You can secure a computer or multiple computers by granting users or groups specific user rights. You can help secure an object, such as a file or folder, by assigning permissions to allow users or groups to perform specific actions on that object. 

Q140. – (Topic 3) 

Your corporate network contains a Remote Desktop Gateway (RD Gateway) server named Server1 and a Remote Desktop Session Host (RD Session Host) server named Server2. 

You have a computer named Computer1 that runs Windows 7. You use Computer1 from home. 

You need to access Server2 from Computer1. 

What should you do? 

A. Run Mstsc.exe /admin /v:server2:443. 

B. Run Mstsc.exe /console /v:server2:8080. 

C. Create a Remote Desktop Connection and modify the Connect from anywhere settings. 

D. Create a Remote Desktop Connection and modify the Server authentication settings. 

Answer:

Explanation: 

To connect using an RD Gateway server, navigate to the Advanced tab of the Remote Desktop Connection Properties dialog box and click Settings under Connect From Anywhere. This opens the RD Gateway Server Settings dialog box. This dialog box allows you to specify RD Gateway settings, including whether or not you want the RD Gateway to be detected automatically, whether to use a specific RD Gateway server, as shown in the firgure, or you can specify Do Not Use an RD Gateway Server, which is the default setting. 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.