It is more faster and easier to pass the Microsoft 70 412 dumps exam by using Refined Microsoft Configuring Advanced Windows Server 2012 Services questuins and answers. Immediate access to the Up to the minute microsoft 70 412 Exam and find the same core area 70 412 pdf questions with professionally verified answers, then PASS your exam with a high score now.
2017 NEW RECOMMEND
Free VCE & PDF File for Microsoft 70-412 Real Exam
Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions
Q91. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured to support key archival and recovery.
You create a new Active Directory group named Group1.
You need to ensure that the members of Group1 can request a Key Recovery Agent certificate.
The solution must minimize the permissions assigned to Group1.
Which two permissions should you assign to Group1? (Each correct answer presents part of the solution. Choose two.)
B. Auto enroll
E. Full control
See step 6 below. To configure the Key Recovery Agent certificate template Open the Certificate Templates snap-in. In the console tree, right-click the Key Recovery Agent certificate template. Click Duplicate Template. In Template, type a new template display name, and then modify any other optional properties as needed. On the Security tab, click Add, type the name of the users you want to issue the key recovery agent certificates to, and then click OK. Under Group or user names, select the user names that you just added. Under Permissions, select the Read and Enroll check boxes, and then click OK.
Reference: Identify a Key Recovery Agent
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. Server1 is configured to resolve single-label names for DNS clients.
You need to view the number of queries for single-label names that are resolved by Server1.
What command should you run?
To answer, select the appropriate options in the answer area.
Q93. You have a server named Server1 that runs Windows Server 2012 R2.
You start Server1 by using Windows RE.
You need to repair the Boot Configuration Data (BCD) store on Server1.
Which tool should you use?
Q94. DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. All servers run Windows Server 2012 R2.
All domain user accounts have the Division attribute automatically populated as part of the user provisioning process. The Support for Dynamic Access Control and Kerberos armoring policy is enabled for the domain.
You need to control access to the file shares on Server1 based on the values in the Division attribute and the Division resource property.
Which three actions should you perform in sequence?
Q95. DRAG DROP
Your network contains an Active Directory domain named contoso.com. All file servers in the domain run Windows Server 2012 R2.
The computer accounts of the file servers are in an organizational unit (OU) named OU1. A Group Policy object (GPO) named GPO1 is linked to OU1.
You plan to modify the NTFS permissions for many folders on the file servers by using central access policies.
You need to identify any users who will be denied access to resources that they can currently access once the new permissions are implemented.
In which order should you Perform the five actions?
Q96. You have a server named Server1 that runs Windows Server 2012 R2.
You modify the properties of a system driver and you restart Server1.
You discover that Server1 continuously restarts without starting Windows Server 2012 R2.
You need to start Windows Server 2012 R2 on Server1 in the least amount of time. The
solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Repair Your Computer
B. Last Known Good Configuration (advanced)
C. Disable Driver Signature Enforcement
D. Disable automatic restart on system failure
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Reference: Using Last Known Good Configuration
Q97. Your company has two offices. The offices are located in Seattle and Montreal.
The network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named Server1 and Server2. Server1 is located in the Seattle office. Server2 is located in the Montreal office. All servers run Windows Server 2012 R2.
You need to create a DHCP scope for video conferencing in the Montreal office. The scope must be configured as shown in the following table.
Which Windows PowerShell cmdlet should you run?
The Add-DhcpServerv4MulticastScope cmdlet adds a multicast scope on the Dynamic Host Configuration Protocol (DHCP) server.
Note: IPv4 multicast addresses are defined by the leading address bits of 1110, originating from the classful network design of the early Internet when this group of addresses was designated as Class D. The Classless Inter-Domain Routing (CIDR) prefix of this group is 220.127.116.11/4. The group includes the addresses from 18.104.22.168 to 22.214.171.124.
Q98. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.
You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2.
You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.
To which group on Server2 should you add Tech1?
A. IPAM MSM Administrators
B. IPAM Administrators
D. Remote Management Users
If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be a member of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of the appropriate IPAM security group (or local Administrators group).
Reference: IPAM Deployment Planning, IPAM specifications
Q99. DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookup enterprise registration and you receive the following results:
You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request?
To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Q100. Your network contains an Active Directory domain named contoso.com.
A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS) on a server named Server1.
After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.
You attempt to deploy AD RMS.
During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found.
You need to ensure that clients will only attempt to establish connections to the new AD RMS deployment.
Which should you do?
A. From DNS, remove the records for Server1.
B. From DNS, increase the priority of the DNS records for the new deployment of AD RMS.
C. From Active Directory, remove the computer object for Server1.
D. From Active Directory, remove the SCP.
Explanation: The Active Directory Rights Management Services (AD RMS) Service Connection Point (SCP) is an object in Active Directory that holds the web address of the AD RMS certification cluster. AD RMS-enabled applications use the SCP to discover the AD RMS service; it is the first connection point for users to discover the AD RMS web services.
Only one SCP can exist in your Active Directory forest. If you try to install AD RMS and an SCP already exists in your forest from a previous AD RMS installation that was not properly deprovisioned, the new SCP will not install properly. It must be removed before you can establish the new SCP.
Reference: The AD RMS Service Connection Point