trainsignal 70-642 (61 to 70)

Proper study guides for Improve Microsoft TS: Windows Server 2008 Network Infrastructure, Configuring certified begins with Microsoft 70-642 preparation products which designed to deliver the Top Quality 70-642 questions by making you pass the 70-642 test at your first time. Try the free 70-642 demo right now.

2016 Jun 70-642 Study Guide Questions:

Q61. – (Topic 4) 

Your network has an internal network and a perimeter network. A firewall named Firewall1 separates the perimeter network and the Internet. 

You deploy a server named Server1 to the perimeter network. 

You configure Server1 as a PPTP VPN server. 

You need to ensure that users from the Internet can establish VPN connections to Server1. The solution must minimize the number of open ports on Firewall1. 

What should you open on the firewall? (Each correct answer presents part of the solution. Choose three.) 

A. UDP 1723 

B. UDP 4500 

C. TCP 500 

D. TCP 4500 

E. UDP 500 

F. Protocol 50 

G. TCP 1723 

H. Protocol 47 

Answer: A,G,H 

Explanation: Ref: http://www.speedguide.net/port.php?port=1723 

Q62. – (Topic 4) 

Your network contains a domain controller named DC1 that runs Windows Server 2008 R2 Service Pack 1 (SP1). 

You need to create a script to clear the address table cache of the physical network interface. 

Which tool should you run in the script? 

A. route.exe 

B. netbtugc.exe 

C. netsh.exe 

D. dnscacheugc.exe 

Answer: C 

Explanation: To flush/Delete the ARP cache in windows 7/Vista/XP/2000/Server 2003/2008 follow this procedure 

Click on Start—>Run—> type the following command click ok 

netsh interface ip delete arpcache Note: 

* The Address Resolution Protocol (ARP) is very crucial for TCP/IP network communication. If you begin to notice network connectivity problems such as particular web pages not loading or not being able to ping certain IP addresses then clearing your ARP cache is a good place to start.The TCP/IP ARP Command component provides the functionality to add, delete, or display the IP address for Media Access Control (MAC) address translation. 

Q63. – (Topic 4) 

Your network contains an Active Directory forest named contoso.com. The forest contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1) Standard. 

The forest contains a server named Server2 that runs Windows Server 2008 R2 SP1 Enterprise. Server1 and Server2 have the Print and Document Services server role installed. 

You need to migrate the print queues, printer settings, printer ports, and language monitors from Server1 to Server2. 

Which tool should you use? 

A. Print Management 

B. Printmig 

C. Active Directory Users and Computers 

D. Printui 

Answer: A 

Explanation: 

To migrate print servers by using Print Management Open Print Management. In left pane, click Print Servers, right-click the print server that contains the printer queues that you want to export, and then click Export printers to a file. This starts the Printer Migration Wizard. On the Select the file location page, specify the location to save the printer settings, and then click Next to save the printers. Right-click the destination computer on which you want to import the printers, and then click Import printers from a file. This launches the Printer Migration Wizard. On the Select the file location page, specify the location of the printer settings file, and then click Next. On the Select import options page, specify the following import options: Import mode. Specifies what to do if a specific print queue already exists on the destination computer. List in the directory. Specifies whether to publish the imported print queues in the Active Directory Domain Services. Convert LPR Ports to Standard Port Monitors. Specifies whether to convert Line Printer Remote (LPR) printer ports in the printer settings file to the faster Standard Port Monitor when importing printers. Click Next to import the printers. OR To migrate print servers by using a command prompt To open a Command Prompt window, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. Type: CD %WINDIR%\\System32\\Spool\\Tools Printbrm -s \\\\<sourcecomputername> -b -f <filename>.printerExport Type: Printbrm -s \\\\<destinationcomputername> -r -f <filename>.printerExport http://technet.microsoft.com/en-us/library/cc722360.aspx 

70-642  test questions

Up to the immediate present windows 2008 network infrastructure configuring exam-pack 70-642:

Q64. – (Topic 3) 

Your network contains an Active Directory domain. The domain contains four client computers. The client computers are configured as shown in the following table. 

Your company plans to implement DirectAccess. 

You need to identify which client computers can use DirectAccess. 

Which client computers should you identify? (Each correct answer presents part of the solution. Choose two.) 

A. Computer2 

B. Computer3 

C. Computer4 

D. Computer1 

Answer: B,C 

Explanation: 

DirectAccess requires the following: -One or more DirectAccess servers running Windows Server 2008 R2 (with or without UAG) with two network adapters: one that is connected directly to the Internet and one that is connected to the intranet. DirectAccess servers must be a member of an AD DS domain. -On the DirectAccess server, at least two consecutive, public IPv4 addresses assigned to the network adapter that is connected to the Internet. -DirectAccess client computers that are running Windows 7 Enterprise or Windows 7 Ultimate. DirectAccess clients must be members of an AD DS domain. -At least one domain controller and DNS server that is running Windows Server 2008 SP2 or Windows Server 2008 R2. When UAG is used, DirectAccess can be deployed with DNS servers and domain controllers that are running Windows Server 2003 when NAT64 functionality is enabled. -A public key infrastructure (PKI) to issue computer certificates, and optionally, smart card certificates for smart card authentication and health certificates for NAP. For more information, see Public Key Infrastructure on the Microsoft Web site. -Without UAG, an optional NAT64 device to provide access to IPv4-only resources for DirectAccess clients. DirectAccess with UAG provides a built-in NAT64. http://technet.microsoft.com/en-us/library/dd637797(v=ws.10).aspx 

Q65. – (Topic 1) 

Your network contains a file server named Server1. Server1 contains a folder named 

Folder1. The permissions for Folder1 are configured as shown in the following table. 

You need to ensure that only members of Group1 can add files to Folder1 over the network. 

What should you do? 

A. Modify the share permission for Group1. 

B. Modify the share permission for Authenticated Users. 

C. Modify the NTFS permission for Group1. 

D. Modify the NTFS permission for Authenticated Users. 

Answer: C 

Q66. – (Topic 2) 

Your company has a main office and a branch office. 

The network contains two DNS servers named DNS1 and DNS2. 

DNS1 is located in the main office. DNS1 hosts a primary standard zone named contoso.com. The contoso.com zone is configured to use DNSSEC. 

DNS2 is located in the branch office. DNS2 is a caching-only DNS server. 

You need to ensure that client computers in the branch office can receive authoritative responses to queries for contoso.com if a WAN link fails. DNSSEC security must be maintained. 

What should you configure on DNS2 for contoso.com? 

A. a conditional forwarder 

B. a secondary zone 

C. a zone delegation 

D. an Active Directory-integrated stub zone 

Answer: B 

certleader.com

Real server 2008 exam 70-642:

Q67. DRAG DROP – (Topic 4) 

Your network contains a server named Server1 that runs Windows Server 2008 R2. 

You need to log performance counter data from Server1 to a SQL database. 

What should you do? 

To answer, move the appropriate actions from the Possible Actions list to the Necessary 

Actions area and arrange them in the correct order. 

Answer: 

Q68. – (Topic 3) 

Your company has a single Active Directory domain. 

The company has a main office and three branch offices. The domain controller in the main office runs 

Windows Server 2008 R2 and provides DNS for the main office and all of the branch offices. Each branch office contains a file server that runs Windows Server 2008 R2. 

Users in the branch offices report that it takes a long time to access network resources. You confirm that there are no problems with WAN connectivity or bandwidth. You need to ensure that users in the branch offices are able to access network resources as quickly as possible. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Configure a standard primary zone in each of the branch offices. 

B. Configure forwarders that point to the DNS server in the main office. 

C. Configure a secondary zone in each of the branch offices that uses the main office DNS server as a master. 

D. Install DNS servers in each of the branch offices. 

Answer: C,D 

Q69. – (Topic 3) 

Network Access Protection (NAP) is configured for the corporate network. Users connect to the corporate network by using portable computers. The company policy requires confidentiality of data when the data is in transit between the portable computers and the servers. 

You need to ensure that users can access network resources only from computers that comply with the company policy. 

What should you do? 

A. Create an IPsec Enforcement Network policy. 

B. Create an 802.1X Enforcement Network policy. 

C. Create a Wired Network (IEEE 802.3) Group policy. 

D. Create an Extensible Authentication Protocol (EAP) Enforcement Network policy. 

Answer: A 

Q70. – (Topic 2) 

Your network contains a file server named Server1 that runs Windows Server 2008 R2. 

Server1 has a volume named E. 

From the File Server Resource Manager console, you create a new quota for volume E. 

The quota is derived from the 100 MB limit quota template. 

You need to prevent users from storing audio and video files on volume E. 

What should you do? 

A. Create a file screen. 

B. Create a file management task. 

C. Modify the properties of the quota. 

D. Modify the properties of the Audio and Video Files file group. 

Answer: A 

Explanation: 

Create a File Screen to prevent users from saving of video/audio files to a share and send notifications when users attempt to do that. 

About 70-642 Information: 70-642 Dumps

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.