What Does 642-980 practice Mean?

Testking offers free demo for 642-980 exam. “Troubleshooting Cisco Data Center Unified Fabric”, also known as 642-980 exam, is a Cisco Certification. This set of posts, Passing the Cisco 642-980 exam, will help you answer those questions. The 642-980 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 642-980 exams and revised by experts!

2017 NEW RECOMMEND

Free VCE & PDF File for Cisco 642-980 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 642-980 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/642-980-dumps.html

Q11. Which three statements are true regarding trunking on an ISL between two switches in order for the VSAN to be trunked? (Choose three.) 

A. The VSAN must be defined on both switches. 

B. The VSAN must be on the VSAN allowed list. 

C. All VSANs that are being trunked must be using either enhanced or non-enhanced mode zoning, but not both. 

D. IVR must be configured for Cisco Fabric Services. 

E. The device alias database must successfully merge. 

F. There cannot be any duplicate domain IDs within an individual VSAN. 

Answer: ABF 

Q12. The Cisco Nexus 2248 FEX has been added recently to the network via a vPC to the Nexus 5000 switches; however, connectivity is not yet operational. What is the problem with the configuration? 

A. Both Nexus 5000 switches must associate to the same FEX number 

B. Each Nexus 5000 should have its own FEX to support a straight-through topology. 

C. The maximum number of links for pinning purposes should be increased to 2. 

D. Ethernet1/18 must be configured without a port channel. 

Answer:

Q13. Refer to the exhibit. 

The server port connected to the NPV edge switch does not come online. Which action should fix the problem? 

A. Move the NP ports on the NPV edge and the F ports on the NPIV into the same VSAN 

99. 

B. Move the NP ports on the NPV edge and the F ports on the NPIV in the default VSAN 1. 

C. Move all the ports into VLAN 1. 

D. Move all the ports into VSAN 99. 

E. Move all the ports into VLAN 99. 

Answer:

Q14. You are no longer seeing updates to the device-aliases database on your Cisco Nexus 5596UP Switch. Which command is useful to determine if the scope of Cisco Fabric Services application distribution was being administratively limited? 

A. N5K2# show cfs region 

B. N5K2# show cfs scope 

C. N5K2# show cfs locale 

D. N5K2# show cfs acl 

E. N5K2# show cfs firewall 

Answer:

Q15. Which command would you use to find the AED of an extended VLAN in a dual-homed site of an OTV network? 

A. show otv aed on the AED 

B. show otv site on any edge devices in the site 

C. show otv vlan on the AED 

D. show otv aed on any edge devices in the site 

E. show otv vlan on any edge devices in the site 

Answer:

Q16. A customer is troubleshooting FCoE in its network. They have discovered that vFC is currently down and there is no active STP port state on the bound Ethernet interface. What should the STP port state be to correct this issue? 

A. The bound interface should be in an STP forwarding state for the native VLAN only. 

B. The bound interface should be in an STP learning state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN. 

C. The bound interface should be in an STP forwarding state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN. 

D. The bound interface should be in an STP blocking state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN. 

Answer:

Q17. When configuring LLDP on Cisco Nexus 5548 Switch, what is the purpose of LLDP hold time global configuration command? 

A. LLDP holdtime option is to set the length of time in milliseconds that a device should save LLDP information received before discarding it 

B. LLDP holdtime option is to set the length of time in seconds that a device should save LLDP information received before discarding it 

C. LLDP holdtime option to is the length of time in milliseconds to wait before performing LLDP initialization on any interface 

D. LLDP holdtime option to is the length of time in seconds to wait before performing LLDP initialization on any interface 

Answer:

Q18. When a directly connected host pings a switch virtual interface on the Cisco Nexus 7000 Series Switch, there is intermittent ping loss. What is the cause? 

A. CoPP is applying microflow policing to all traffic from the host that is destined to the CPU. 

B. CoPP is applying microflow policing to all traffic to the host that is leaving the CPU. 

C. CoPP is rate-limiting all ICMP traffic that is destined to the CPU. 

D. CoPP is rate-limiting all ICMP traffic that is leaving the CPU. 

Answer:

Q19. Which two commands can you issue on a Cisco Nexus 5548UP Switch to determine which interfaces are connected to fabric extenders? (Choose two.) 

A. show fex-fabric interface 

B. show fex 

C. show fex fex-id 

D. show fex interface 

E. show fex detail 

Answer: CE 

Q20. Your customer has a dual Cisco Nexus 7010 Switches in its data center. Customer's representatives want to know how to determine if Cisco IOS ISSU is possible on the switches as they are upgrading to version 6.0.4. Which command is useful to determine if the upgrade will be non-disruptive? 

A. N7010-C1# show system redundancy ha status 

B. N7010-C1# show incompatibility system 

C. N7010-C1# install all 

D. N7010-C1# show issu test bootflash:n7000-s1-system.6.0.4.bin 

Answer:

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.