Where to find 70 412 vce

Master the 70 412 dumps Configuring Advanced Windows Server 2012 Services content and be ready for exam day success quickly with this Actualtests examcollection 70 412 book. We guarantee it!We make it a reality and give you real 70 412 dumps questions in our Microsoft microsoft 70 412 braindumps.Latest 100% VALID Microsoft examcollection 70 412 Exam Questions Dumps at below page. You can use our Microsoft mcsa 70 412 braindumps and pass your exam.

2017 NEW RECOMMEND

Free VCE & PDF File for Microsoft 70-412 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 70-412 Exam Dumps (PDF & VCE):
Available on:
http://www.certleader.com/70-412-dumps.html

Q51. You have a server named LON-DC1 that runs Windows Server 2012 R2. An iSCSI virtual disk named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.) 

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt 

iSCSI target. 

VirtualiSCSIl.vhd is removed from LON-DC1. 

You need to assign VirtualiSCSI2.vhd a logical unit value of 0. 

What should you do? 

A. Run the Set-VirtualDisk cmdlet and specify the -Uniqueld parameter. 

B. Run the Add-IscsiVirtualDiskTargetMapping cmdlet and specify the –Lun parameter. 

C. Run the iscsicli command and specify the reportluns parameter. 

D. Run the Set-IscsiVirtualDisk cmdlet and specify the –DevicePath parameter. 

Answer:

Explanation: The Add-IscsiVirtualDiskTargetMapping cmdlet assigns a virtual disk to an 

iSCSI target. Once a virtual disk has been assigned to a target, and after the iSCSi initiator 

connects to that target, the iSCSI initiator can access the virtual disk. All of the virtual disks 

assigned to the same iSCSI target will be accessible by the connected iSCSI initiator. 

Parameter include: -Lun<Int32> 

Specifies the logical unit number (LUN) associated with the virtual disk. By default, the 

lowest available LUN number will be assigned. 

Reference: Add-IscsiVirtualDiskTargetMapping 

https://technet.microsoft.com/en-us/library/jj612800(v=wps.630).aspx 

Q52. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed. 

A technician performs maintenance on Server1. 

After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1. 

You open the Services console as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can connect to the IPAM server. 

Which service should you start? 

A. Windows Process Activation Service 

B. Windows Event Collector 

C. Windows Internal Database 

D. Windows Store Service (WSService) 

Answer:

Explanation: 

Explanation Windows Internal Database 

Windows Internal Database is a relational data store that can be used only by Windows 

roles and features. 

IPAM does not support external databases. Only a Windows Internal Database is 

supported. 

IPAM stores 3 years of forensics data (IP address leases, host MAC addresses, user 

login/logoff information) for 100,000 users in a Windows Internal Database. There is no 

database purge policy provided, and the administrator must purge data manually as 

needed. 

Incorrect: 

Not A. IPAM works even if the Windows Process Activation Service is not running. 

Not B. IPAM does not require the Windows Event Collector Service. It need to be running 

on the managed DC/DNS/DHCP computers. 

Not D. IPAM does not require the Windows Store Service. It provides infrastructure support 

for Windows Store.This service is started on demand and if disabled applications bought 

using Windows Store will not behave correctly. 

Reference: IPAM Deployment Planning 

Q53. Your network contains an Active Directory domain named contoso.com. The domain 

contains a certification authority (CA). 

You suspect that a certificate issued to a Web server is compromised. 

You need to minimize the likelihood that users will trust the compromised certificate. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Stop the Certificate Propagation service. 

B. Modify the validity period of the Web Server certificate template. 

C. Run certutil and specify the -revoke parameter. 

D. Run certutil and specify the -deny parameter. 

E. Publish the certificate revocation list (CRL). 

Answer: C,E 

Explanation: First revoke the certificate, then publish the CRL. 

Q54. DRAG DROP 

Your network contains four servers that run Windows Server 2012 R2. 

Each server has the Failover Clustering feature installed. Each server has three network 

adapters installed. An iSCSI SAN is available on the network. 

You create a failover cluster named Cluster1. You add the servers to the cluster. 

You plan to configure the network settings of each server node as shown in the following table. 

You need to configure the network settings for Cluster1. 

What should you do? 

To answer, drag the appropriate network communication setting to the correct cluster network. Each network communication setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 

Answer: 

Q55. You have a server named Server1 that runs Windows Server 2012 R2. 

From Server Manager, you install the Active Directory Certificate Services server role on 

Server1. 

A domain administrator named Admin1 logs on to Server1. 

When Admin1 runs the Certification Authority console, Admin1 receive the following error message. 

You need to ensure that when Admin1 opens the Certification Authority console on Server1, the error message does not appear. 

What should you do? 

A. Run the Install-AdcsCertificationAuthority cmdlet. 

B. Install the Active Directory Certificate Services (AD CS) tools. 

C. Modify the PATH system variable. 

D. Add Admin1 to the Cert Publishers group. 

Answer:

Explanation: 

* Cannot manage Active Directory Certificate Services 

The error message is related to missing role configuration. 

* Cannot Manage Active Directory Certificate Services Resolution: configure the two Certification Authority and Certification Authority Web Enrollment Roles. 

* Active Directory Certificate Services (AD CS) is an Active Directory tool that lets administrators customize services in order to issue and manage public key certificates. 

AD CS included: 

CA Web enrollment – connects users to a CA with a Web browser 

Certification authorities (CAs) – manages certificate validation and issues certificates 

Etc. 

Incorrect: 

Not A. The CA is installed, it just need to be configured correctly. 

Note: Install-AdcsCertificationAuthority 

The Install-AdcsCertificationAuthority cmdlet performs installation and configuration of the 

AD CS CA role service. 

Reference: Cannot manage Active Directory Certificate Services in Server 2012 Error 

0x800070002; Active Directory Certificate Services (AD CS) Definition 

http://searchwindowsserver.techtarget.com/definition/Active-Directory-Certificate-Services-

AD-CS 

Q56. Your network contains an Active Directory forest named adatum.com. All servers run Windows Server 2012 R2. The domain contains four servers. The servers are configured as shown in the following table. 

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. 

On which server should you install IPAM? 

A. Server1 

B. Server2 

C. Server3 

D. Server4 

Answer:

Explanation: 

An IPAM server is intended as a single-purpose server. It is not recommended to collocate 

other network infrastructure roles such as DNS or DHCP on the same server. IPAM installation is not supported on a domain controller, and discovery of DHCP servers will be disabled if you install IPAM on a server that is also running the DHCP Server service. The following features and tools are automatically installed when you install IPAM Server. 

Reference: IPAM Deployment Planning 

Q57. Your company recently deployed a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. 

You need to identify the time-to-live (TTL) value for domain referrals to the NETLOGON and SYSVOL shared folders. 

Which tool should you use? 

A. Ultrasound 

B. Replmon 

C. Dfsdiag 

D. Frsutil 

Answer:

Explanation: 

Explanation/Reference: 

DFSDIAG can check your configuration in five different ways: 

Checking referral responses (DFSDIAG /TestReferral) 

Checking domain controller configuration 

Checking site associations 

Checking namespace server configuration 

Checking individual namespace configuration and integrity 

Reference: Five ways to check your DFS-Namespaces (DFS-N) configuration with the 

DFSDIAG.EXE tool 

Q58. You have a server named Server1 that runs Windows Server 2012 R2. 

From Server Manager, you install the Active Directory Certificate Services server role on Server1. 

A domain administrator named Admin1 logs on to Server1. 

When Admin1 runs the Certification Authority console, Admin1 receive the following error message. 

You need to ensure that when Admin1 opens the Certification Authority console on Server1, the error message does not appear. 

What should you do? 

A. Install the Active Directory Certificate Services (AD CS) tools. 

B. Run the regsvr32.exe command. 

C. Modify the PATH system variable. 

D. Configure the Active Directory Certificate Services server role from Server Manager. 

Answer:

Explanation: 

The error message is related to missing role configuration. 

* Cannot Manage Active Directory Certificate Services Resolution: configure the two Certification Authority and Certification Authority Web Enrollment Roles: 

image 

Reference: Cannot manage Active Directory Certificate Services in Server 2012 Error 0x800070002 

Q59. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. 

Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. 

Port rules are configured for all clustered Applications. 

You need to ensure that Server2 handles all client requests to the cluster that are NOT covered by a port rule. 

What should you configure? 

A. Affinity-None 

B. Affinity-Single 

C. The cluster quorum settings 

D. The failover settings 

E. A file server for general use 

F. The Handling priority 

G. The host priority 

H. Live migration 

I. The possible owner 

J. The preferred owner 

K. Quick migration 

L. The Scale-Out File Server 

Answer:

Explanation: 

Host Priorities Each cluster host is assigned a unique host priority in the range of 1 to 32, where lower numbers denote higher priorities. The host with the highest host priority (lowest numeric value) is called the default host. It handles all client traffic for the virtual IP addresses that is not specifically intended to be load-balanced. This ensures that server applications not configured for load balancing only receive client traffic on a single host. If the default host fails, the host with the next highest priority takes over as default host. 

Reference: Network Load Balancing Technical Overview 

http://technet.microsoft.com/en-us/library/bb742455.aspx 

Q60. Your company recently deployed a new Active Directory forest named contoso.com. The forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server 2012 R2. 

You need to force the replication of the SYSVOL folder from Site1 to Site2. 

Which tool should you use? 

A. Active Directory Sites and Services 

B. DFS Management 

C. Repadmin 

D. Dfsrdiag 

Answer:

Explanation: 

In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force replication immediately by using DFS Management, as described in Edit Replication Schedules. You can also force replication by using the Dfsrdiag SyncNow command. You can force polling by using the Dfsrdiag PollAD command. 

Reference: DFS Replication: Frequently Asked Questions (FAQ) 

http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072 

Certleader Dumps
Certleader is a company specialized on providing high quality IT exam materials and fully committed to assist our respected clients crack any IT certification tests on their 1st efforts.