A Complete Guide to ccsa 156 215.77

Your success in Check Point ccsa 156 215.77 is our sole target and we develop all our 156 215.77 pdf braindumps in a way that facilitates the attainment of this target. Not only is our 156 215.77 pdf study material the best you can find, it is also the most detailed and the most updated. 156 215.77 pdf Practice Exams for Check Point CCSA exam 156 215.77 are written to the highest standards of technical accuracy.


Free VCE & PDF File for Check Point 156-215.77 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 156-215.77 Exam Dumps (PDF & VCE):
Available on:

Q131. – (Topic 2) 

Which Check Point address translation method is necessary if you want to connect from a host on the Internet via HTTP to a server with a reserved (RFC 1918) IP address on your DMZ? 

A. Hide Address Translation 

B. Static Destination Address Translation 

C. Port Address Translation 

D. Dynamic Source Address Translation 


Q132. – (Topic 3) 

Why should the upgrade_export configuration file (.tgz) be deleted after you complete the import process? 

A. It contains your security configuration, which could be exploited. 

B. It will prevent a future successful upgrade_export since the .tgz file cannot be overwritten. 

C. SmartUpdate will start a new installation process if the machine is rebooted. 

D. It will conflict with any future upgrades when using SmartUpdate. 


Q133. – (Topic 3) 

What happens when you run the commanD. fw sam -J src [Source IP Address]? 

A. Connections to and from the specified target are blocked without the need to change the Security Policy. 

B. Connections to and from the specified target are blocked with the need to change the Security Policy. 

C. Connections from the specified source are blocked without the need to change the Security Policy. 

D. Connections to the specified target are blocked without the need to change the Security Policy. 


Q134. – (Topic 1) 

Although SIC was already established and running, Joe reset SIC between the Security Management Server and a remote Gateway. He set a new activation key on the Gateway's side with the command cpconfig and put in the same activation key in the Gateway's object on the Security Management Server. Unfortunately, SIC cannot be established. What is a possible reason for the problem? 

A. Joe forgot to exit from cpconfig. 

B. The installed policy blocks the communication. 

C. The old Gateway object should have been deleted and recreated. 

D. Joe forgot to reboot the Gateway. 


Q135. – (Topic 3) 

How many packets does the IKE exchange use for Phase 1 Main Mode? 

A. 6 

B. 12 

C. 1 

D. 3 


Q136. – (Topic 3) 

Which R77 GUI would you use to see the number of packets accepted since the last policy install? 

A. SmartView Monitor 

B. SmartView Status 

C. SmartView Tracker 

D. SmartDashboard 


Q137. – (Topic 2) 

Which SmartView Tracker mode allows you to read the SMTP e-mail body sent from the Chief Executive Officer (CEO) of a company? 

A. Display Capture Action 

B. This is not a SmartView Tracker feature. 

C. Display Payload View 

D. Network and Endpoint Tab 


Q138. – (Topic 1) 

Message digests use which of the following? 

A. SHA-1 and MD5 

B. IDEA and RC4 

C. SSL and MD4 

D. DES and RC4 


Q139. – (Topic 2) 

Which of the following can be found in cpinfo from an enforcement point? 

A. Policy file information specific to this enforcement point 

B. The complete file objects_5_0.c 

C. VPN keys for all established connections to all enforcement points 

D. Everything NOT contained in the file r2info 


106. – (Topic 2) 

What is the default setting when you use NAT? 

A. Source Translated on Client side 

B. Source Translated on both sides 

C. Destination Translated on Client side 

D. Destination Translated on Server side 


Q140. – (Topic 3) 

Which of the following items should be configured for the Security Management Server to authenticate using LDAP? 

A. Login Distinguished Name and password 

B. Windows logon password 

C. Check Point Password 

D. WMI object