exam for 70-410 [May 2016]

Free of 70-410 real exam materials and study guides for Microsoft certification for examinee, Real Success Guaranteed with Updated 70-410 pdf dumps vce Materials. 100% PASS Installing and Configuring Windows Server 2012 exam Today!

2016 May 70-410 Study Guide Questions:

Q271. – (Topic 3) 

Your network contains an active directory domain named Contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Hyper-V server role installed. You have a virtual machine named VM1. VM1 has a snapshot. You need to modify the Snapshot File Location of VM1. 

What should you do first? 

A. Copy the snapshot file 

B. Pause VM1 

C. Shut down VM1 

D. Delete the snapshot 

Answer: D 

Explanation: 

Snapshot data files are stored as .avhd files. Taking multiple snapshots can quickly consume storage space. In the first release version of Hyper-V (KB950050) and in Hyper-V in Windows Server 2008 Service Pack 2, snapshot, snapshot data files usually are located in the same folder as the virtual machine by default. In Hyper-V in Windows Server 2008 R2, the files usually are located in the same folder as the virtual hard disk. The following exceptions affect the location of the snapshot data files: If the virtual machine was imported with snapshots, they are stored in their own folder. If the virtual machine has no snapshots and you configure the virtual machine snapshot setting, all snapshots you take afterwards will be stored in the folder you specify. Caution Do not delete .avhd files directly from the storage location. Instead, use Hyper-V Manager to select the virtual machine, and then delete the snapshots from the snapshot tree. Do not expand a virtual hard disk when it is used in a virtual machine that has snapshots. Doing so will make the snapshots unusable. http://technet.microsoft.com/en-us/library/dd560637(v=ws.10).aspx 

Q272. – (Topic 3) 

You have a server named Server1 that has the Print and Document Services server role installed. 

You need to provide users with the ability to manage print jobs on Server1 by using a web browser. 

What should you do? 

A. Start the Printer Extensions and Notifications service and set the service to start automatically. 

B. Install the LPD Service role service. 

C. Start the Computer Browser service and set the service to start automatically. 

D. Install the Internet Printing role service. 

Answer: D 

Explanation: 

References: Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP). http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731857.aspx 

Q273. – (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

Contoso.com has a server, named ENSUREPASS-SR13, which is configured as the primary DNS server in the Contoso.com domain. Contoso.com has another server, named ENSUREPASS-SR14, which makes use of ENSUREPASSSR13 for DNS queries. 

You want to make sure that running nslookup.exe from ENSUREPASS-SR14 produces a result that shows the proper name of the default server. 

Which of the following actions should you take? 

A. You should consider creating a reverse lookup zone on ENSUREPASS-SR14. 

B. You should consider creating a forward lookup zone on ENSUREPASS-SR14. 

C. You should consider creating a reverse lookup zone on ENSUREPASS-SR13. 

D. You should consider creating a forward lookup zone on ENSUREPASS-SR13. 

Answer: C

Explanation: 

When you start Nslookup from a command line, the following error message may be displayed: DNS request timed out timeout was x seconds Can’t find server name for address xxx.xxx.xxx.xxx: Timed out Default servers are not available Default Server: UnKnown Address: xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the Internet Protocol (IP) address of the host on which you are attempting to start Nslookup. CAUSE When Nslookup starts, it attempts to resolve the IP address of its host’s DNS server to its fully qualified domain name (FQDN). If the DNS server does not respond or if the DNS server’s reverse lookup zones do not contain a PTR record for the DNS server’s IP address, the error message is displayed. 

70-410  pdf exam

Update windows server 2012 exam 70-410 pdf:

Q274. – (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Server1 and Server2 are member servers. 

You need to ensure that you can manage Server2 from Server1 by using Server Manager. 

Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Install Remote Server Administration Tools on Server1. 

B. Install Windows Management Framework 3.0 on Server2. 

C. Install the Windows PowerShell 2.0 engine on Server1. 

D. Install Microsoft .NET Framework 4 on Server2. 

E. Install Remote Server Administration Tools on Server2. 

Answer: B,D 

Explanation: 

To be able to fully manage remote servers that run Windows Server 2008 or the R2 Service Pack 1 operating system, you should install the .NET Framework 4 on Server2 first followed by the Windows Management Framework 3.0. 

Q275. – (Topic 3) 

You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed. You attach four 500-GB disks to Server1. You need to configure the storage to meet the following requirements: 

. Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years. . Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years. . The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications. . The storage must be available if a single disk fails. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. From File and Storage Services, create virtual disks by using fixed provisioning. 

B. From File and Storage Services, create a storage pool that uses all four disks. 

C. From Disk Management, create two new mirror volumes that use two disks each. 

D. From Disk Management, create a new RAID-5 volume that uses all four disks. 

E. From File and Storage Services, create virtual disks by using thin provisioning. 

Answer: B,E 

Q276. DRAG DROP – (Topic 3) 

You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1. You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.) 

You need to configure bandwidth management for VM1. 

Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.) 

Answer: 

certleader.com

Refined best 70-410 practice exams:

Q277. DRAG DROP – (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You add a new internal SAS disk to Server1. 

You need to ensure that the new disk is available to store files. 

Which three cmdlets should you run in sequence? 

To answer, move the appropriate three cmdlets from the list of cmdlets to the answer area 

and arrange them in the correct order. 

Answer: 

Q278. – (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. You install Windows Server 2012 on a new computer named DC3. You need to manually configure DC3 as a domain controller. Which tool should you use? 

A. Server Manager 

B. winrm.exe 

C. Active Directory Domains and Trusts 

D. dcpromo.exe 

Answer: A 

Q279. – (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain 

contains a server named Server1. Server1 runs Windows Server 2012 R2. 

You need to create a 3-TB virtual hard disk (VHD) on Server1. 

Which tool should you use? 

A. New-StoragePool 

B. Diskpart 

C. File Server Resource Manager (FSRM) 

D. New-StorageSubsytemVirtualDisk 

Answer: B 

Explanation: 

You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\\vdisks\\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file="C:\\vdisks\\disk1.vhd" maximum=16000 

Q280. – (Topic 2) 

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2. 

On DC2, you open Server Manager and you add Server1 as another server to manage. 

From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that when you right-click Server1, you see the option to run the DHCP console. 

What should you do? 

A. In the domain, add DC2 to the DHCP Administrators group. 

B. On Server1, install the Feature Administration Tools 

C. On DC2 and Server1, run winrmquickconfig. 

D. On DC2, install the Role Administration Tools. 

Answer: D 

Reference: http://technet.microsoft.com/en-us/library/ee441255(v=ws.10).aspx 

About 70-410 Information: 70-410 Dumps