Master the 70 410 dumps pdf Installing and Configuring Windows Server 2012 content and be ready for exam day success quickly with this Exambible 70 410 exam questions pdf test. We guarantee it!We make it a reality and give you real 70 410 study guide pdf questions in our Microsoft 70 410 dumps braindumps.Latest 100% VALID Microsoft 70 410 installing and configuring windows server 2012 Exam Questions Dumps at below page. You can use our Microsoft 70 410 installing and configuring windows server 2012 pdf braindumps and pass your exam.
2018 NEW RECOMMEND
Free VCE & PDF File for Microsoft 70-410 Real Exam
Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions
P.S. Virtual 70-410 free demo are available on Google Drive, GET MORE: https://drive.google.com/open?id=1l5e34W-NoOIZWc2w8rOUEhrHQBLmfQEX
New Microsoft 70-410 Exam Dumps Collection (Question 12 – Question 18)
New Questions 12
Your network contains a production Active Directory forest named contoso.com and a test Active Directory forest named contoso.test. A trust relationship does not exist between the forests.
In the contoso.test domain, you create a backup of a Group Policy object (GPO) named GPO1.
You transfer the backup of GPO1 to a domain controller in the contoso.com domain. You need to create a GPO in contoso.com based on the settings of GPO1.You must
achieve this goal by using the minimum amount of Administrative effort.
What should you do?
A. From Windows PowerShell, run the Get- GPO cmdlet and the Copy- GPO cmdlet.
B. From Windows PowerShell, run the New- GPO cmdlet and the Import- GPO cmdlet.
C. From Group Policy Management, create a new starter GPO. Right-click the new starter GPO, and then click Restore from Backup.
D. From Group Policy Management, right-click the Croup Policy Objects container, and then click Manage Backups.
:A. Copy-GPO requires domain trust / copy from one domain to another domain within the same forest.
:B. The Import-GPO cmdlet imports the settings from a GPO backup into a specified target GPO. The target GPO can be in a different domain or forest than that from which the backup was made and it does not have to exist prior to the operation.
:C. This would create a starter GPO, not a GPO.
:D: You can also restore GPOs. This operation takes a backed-up GPO and restores it to the same domain from rom the GPOu2019s original which it was backed up. You cannot restore a GPO from backup into a domain different f domain.
The New-GPO cmdlet creates a new GPO with a specified name. By default, the newly created GPO is not linked to a site, domain, or organizational unit (OU). The Import-GPO cmdlet imports the settings from a GPO backup into a specified target GPO. The target GPO can be in a different domain or forest than that from which the backup was made and it does not have to exist prior to the operation.
The Restore-GPO cmdlet restores a GPO backup to the original domain from which it was saved. If the original domain is not available, or if the GPO no longer exists in the domain, the cmdlet fails.
Since the GPOu2019s original domain is different and there is no trust relationship between forests, you should execute the New-GPO command and import the already existing command into the u2018newu2019 domain.
New Questions 13
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contain several virtual machines that run Windows Server 2012 R2.
You install the Network Load Balancing feature on the virtual machines.
You need to configure the virtual machines to support Network Load Balancing (NLB). Which virtual machine settings should you configure?
A. DHCP guard
B. Port mirroring
C. Router guard
D. MAC address
http://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a0a9d-26a2-49ba- bbbe- 29d11fcbb7ce/nlb-on-hyperv?forum=winserverhyperv
For NLB to be configured you need to enable MAC address spoofing.
New Questions 14
Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager.
What should you do?
A. From Server Manager, click Configure Performance Alerts.
B. From Performance Monitor, create a Data Collector Set (DCS).
C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
D. From Server Manager, click Start Performance Counters.
You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored.
New Questions 15
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec connection.
What should you do?
A. From Windows Firewall with Advanced Security, view the quick mode security association.
B. From Event Viewer, search the Application Log for events that have an ID of 1704.
C. From Event Viewer, search the Security Log for events that have an ID of 4672.
D. From Windows Firewall with Advanced Security, view the main mode security association.
Main mode negotiation establishes a secure channel between two computers by determining a set of cryptographic protection suites, exchanging keying material to establish a shared secret key, and authenticating computer and user identities. A security association (SA) is the information maintained about that secure channel on the local computer so that it can use the information for future network traffic to the remote computer. You can monitor main mode SAs for information like which peers are currently connected to this computer and which protection suite was used to form the SA.
To get to this view
In the Windows Firewall with Advanced Security MMC snap-in, expand Monitoring, expand Security Associations, and then click Main Mode.
The following information is available in the table view of all main mode SAs. To see the information for a single main mode SA, double-click the SA in the list.
Main mode SA information
You can add, remove, reorder, and sort by these columns in the Results pane: Local Address: The local computer IP address.
Remote Address: The remote computer or peer IP address.
1st Authentication Method: The authentication method used to create the SA.
1st Authentication Local ID: The authenticated identity of the local computer used in first authentication.
1st Authentication Remote ID: The authenticated identity of the remote computer used in first authentication.
2nd Authentication Method: The authentication method used in the SA.
2nd Authentication Local ID: The authenticated identity of the local computer used in second authentication.
2nd Authentication Remote ID: The authenticated identity of the remote computer used in second authentication.
Encryption: The encryption method used by the SA to secure quick mode key exchanges. Integrity: The data integrity method used by the SA to secure quick mode key exchanges. Key Exchange: The Diffie-Hellman group used to create the main mode SA.
New Questions 16
Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. Run the Delegation of Control Wizard on OU1.
B. Add User1 to the Group Policy Creator Owners group.
C. Modify the permission on the \\\\Contoso.com\\SYSVOL\\Contoso.com\\Policies folder.
D. Modify the permissions on the User1 account.
The Delegation of Control Wizard allows you to delegate tasks, active Directory Object types and to set permissions.
New Questions 17
Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1.
You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1.
You join Computer1 to the domain.
You need to prevent App1 from running on Computer1. What should you do?
A. From Computer1, run gpupdate/force.
B. From Group Policy Management, add an application control policy to GP1.
C. From Group Policy Management, enable the Enforced option on GP1.
D. In the local Group Policy of Computer1, configure a software restriction policy.
AppLocker policies take precedence over policies generated by SRP on computers that are running an operating system that supports AppLocker.
AppLocker policies in the GPO are applied, and they supersede the policies generated by SRP in the GPO and local AppLocker policies or policies generated by SRP.
New Questions 18
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs windows 8.
DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.)
Computer1 is configured to obtain an IP address automatically.
You notice that Computer1 is unable to obtain an IP address from DC1. You need to ensure that Computer1 can receive an IP address from DC1. What should you do?
A. Disable the Allow filters.
B. Disable the Deny filters.
C. Authorize DC1.contoso.com.
D. Activate Scope [10.1.1.0] Contoso.com.
A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down.
P.S. Easily pass 70-410 Exam with Examcollection Virtual Dumps & pdf vce, Try Free: http://www.examcollectionuk.com/70-410-vce-download.html (479 New Questions)